Randy's New Tank Build

  • Thread starter Thread starter hawkinsrgk
  • Start date Start date
  • Tagged users Tagged users None

hawkinsrgk

Valuable Member
View Badges
Joined
Feb 11, 2010
Messages
1,363
Reaction score
239
Location
Hoover, AL.
Rating - 0%
0   0   0
Hello Everybody. Just wanted to do a post of my new tank build. This is my first saltwater tank, so I needed quite a bit of help and direction from time to time. Also, I cannot thank Mike (mike_dani) enought for all of his help, sharing lessions learned, and just being a good friend in general.

This is after I cleaned on the tank for about two weeks and 1.5 Gallons of vinegar later. The back of the tank was totally covered with calcium deposits. Also, the cart in this picture was built just to move the tank from the neighbors to our house.

SDC10553.jpg



R/O Setup
SDC10548.jpg


SDC10551.jpg


SDC10550.jpg


Lighting Setup. We have vaulted ceilings so this turned out to be a real chore. It didnt help that Im afraid of heights.

SDC10592.jpg
 
Last edited:
Bought a 65G Tank to be used for a Refugium from GlassCages. I was a little worried because of reading mixed reviews about them, but actually it turned out great. The owner agreed to meet me on the weekend when his shop was closed and then gave me a tour of his equipment and some of the tanks his company was currently working on. The second picture is the 4 baffles that will be used in the refugium.

SDC10593.jpg


SDC10594.jpg


SDC10595.jpg
 
Last edited:
The next step was building the Refugium. Actually, I had to build it twice. The first time I built it I used silicone with BioSeal in it. So I had to remove everything and start over. I have read a lot of posts about how GE Silocone II is not very strong, but it sure didnt seem that way to me when I was trying to remove the baffles.

SDC10604.jpg



Also, I wanted to ensure that the refugium did not leak. I have seen several videos of refugiums leaking after they were built. So I needed to do an early test.

My youngest son is very good and breaking things. He seems to break something every day. If the refugium could hold up to him standing beside it, then holding water should be no problem at all.

SDC10606.jpg


Refugium after baffles were complete.

SDC10609.jpg


After the first test, I was confident the second test would pass.

SDC10613.jpg


The part that I didnt take into consideration was how I was going to remove the water from the refugium after the test was over. After a couple of hours of trying a powerhead and syphon which did very little I decided to take the easy approach and just turn over the tank in the garage.
SDC10617.jpg
 
Last edited:
After that was painting the back of the display tank. I ended up using 4 cans of spray paint and had probably in the neighorhood of 40 coats of paint

SDC10607.jpg


I had a small leak on the face plate of the water pump. I used some spare silicone that was left over from the Refugium to fix the problem.

SDC10614.jpg


SDC10616.jpg


SDC10618.jpg


SDC10619.jpg
 
Last edited:
I ended up with approximately 1/16 of an inch of clearance between the return plumbing and the stand.

SDC10620.jpg


SDC10625.jpg


SDC10624.jpg


SDC10623.jpg

pencil.png
 
Last edited:
I had a 60GPD R/O system. It seemed more like 60 Gallons per week. It took forever.

SDC10632.jpg
SDC10633.jpg
SDC10634.jpg
SDC10635.jpg


The R/O Unit has a small leak that I cant seem to resolve. Tried everything that from type of silicone lube. So I ended up using some plasitic liner on the topoff box.

SDC10638.jpg
 
The next pics are some misc items. Used some fishing string to mod the skimmer propeller. Made a filter sock out of some extra filter media that I had and a couple of max jet mods.

SDC10650.jpg
SDC10661.jpg
SDC10651.jpg
SDC10662.jpg
 
Bought 150 Pounds of Rock from Marco Rock. I could not be happier with this rock. The first thing was the shipping weight was 163 pounds with very little rubble. I took a picture of the amount of rubble because I was so impressed. The green bucked in the picture is a one gallon bucket.

SDC10665.jpg
SDC10666.jpg
SDC10667.jpg
SDC10668.jpg
SDC10693.jpg


Thats is where I am currently with this build. Plan to get some live rock soon and start cycling the tank. Will update this thread when the cycle is complete.
 
Randy - wow! You're got it shining like a new penny! I know you are anxious to get it started and building your new reef. I'm sure Mike and others have told you to be patient, take your time, and let your reef "grow" instead of trying to do everything at once.

A couple of things you may want to look at. I see a Fluval canister filter in one of your pics. Are you planning to use that? Many people have realized that unless you clean a canister filter every couple of days that they become a detritus trap and create nitrates. Your live rock and skimmer will be all the filtration you need for a reef tank. The same applies to the filter socks. You may want to use them for a day or so to polish the water but they should be kept clean. They will also trap any of your beneficial critters such as worms and pods. Some people like to use them but if you do make sure you keep them clean. Also, you may want to put some kind of enclosure around your float valve to keep snails off of it. A snail will eventually park on the float and you'll wake up one morning to a flood.

Keep up the good work and keep us updated with more pics as it comes together. Try to make the meeting this month at Jason and Tammy's place. They have some very impressive tanks.
 
Hi Harry

Thank you for the good word. I wanted to go ahead and do a post since Im assuming it will take the tank 2-3 months to cycle. I really wish I would have thought about taking a picture of the tank before I cleaned it. It was very nasty. Been working on it for a little under 4 months now.

As far as the canister filter goes, I have no plans to use it on this tank. There were a lot of things that came with the purchase that Im not going to use
Canister Filter - May end up using it on a 30G goldfish tank that I have, but not really sure at this time. When I started this build I told myself that I was getting out of the freshwater game.
Mag 7 pump - The pump that came with this was way too small. Not really sure if the pump is even strong enough to pump water to the tank, but thats what came with it. I took the Mag 18 that I had on the 125G Cichlid tank and used a Mag 12 in its place.
SCWD .75 - May make a good door stop if the kids are not around. In my opinion .75 would work with the Mag 7 but not for this tank.
Stealth Heater 200W - Mike has had a lot of problems with his so I didnt want to take the chance. Will probably use it for water changes.
Marineland sump - This is actually an ideal sump for the cichlid tank, but didnt think it was large enough for the reef tank.

The main deal for the filter socks was the clean the dust off the rocks and tank during the initial setup. The plan it to take them out before anything thats living goes into the tank.

The float valve is now in the return section of the refugium. Will a snail be able to make it down there? It would have to go down the drain pipe and either over the refugium wall or accross a bubble trap without being sucked up by the return pump. The part that kinda worries me is I have already had one flood. Basically I did some calculations and came up with that it would take a least 7.1 gallons of water to flood the display tank. The topoff section is a little over 6 gallons, so I thought I was safe. What happend when I first set this up was water pumped to the display tank a little faster than it was draining. It ran fine for 7 hours so I went to bed. The topoff kicked on and the party started.

Thanks
Randy
 
I don't use any kind of auto topoff. I'm not that technically advanced right now. For me it's water in a bucket. There are dual topoff systems that have a secondary float to catch a high water level and shut it down if the first one fails. I think if I use one that's what I'd get. Now when I'm away for a few days somebody else comes in and tops off every day. If I had an auto topoff he wouldn't be here. I couldn't enjoy myself while I was away thinking about coming home to water trickling down the driveway. I've got snails in all my sumps. They'll go over the top of the overflows. I throw one back in the tank every couple of days.
 
If anybody has any suggestions on how to stop the R/O Unit from leaking please let me know. So far I have tried tyflon tape and tried lifeguard O ring sealer.
base_media.jpg
 
If it's leaking where the canisters screw on it probably:

Not quite tight enough
Bad O ring
Piece of trash on the O ring
Cracked canister
 
I agree with Harry and also the little fittings where the tubes go to the individual canisters took a lot of tightening on mine as well.
Terry
 
Thank you. I had taken some pictures to give an update but I screwed them up trying to resize them for this post. Will post another update soon.
 
Wanted to give another update. The clip on Refugium light is a 85W 6500K that I got from Lowes.

SDC10766.jpg


Picked up crushed beach shell when we went on vacation. Cleaned the shell for over a week in R/O water. The R/O water was changed out approximately 15-20 times before it was added to the display tank.


SDC10761.jpg

SDC10762.jpg


SDC10763.jpg


SDC10764.jpg
 
Last edited:
FWIW I presume the 85w on the refugium is the incasdescent equilivant and not the actual watts. Which would probably be aouren 15w or so.
 
Thats correct, I think the actual power is 16w. If its not enough power I can always add another one for around $15
 
Looking good Randy. You will be ready
for a fish soon. Remember don't follow my lead and add 15 fish all at once.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new