Rasta Leather Fragging

  • Thread starter Thread starter Bear Claw
  • Start date Start date
  • Tagged users Tagged users None

Bear Claw

Well-Known Member
View Badges
Joined
Oct 16, 2021
Messages
501
Reaction score
188
Location
Raleigh, North Carolina
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
I will soon be fragging my rasta leather and wanted to make sure I had the steps right.

1. Take the leather out of the tank and put it into a separate container.
2. Snip off pieces
3. Glue pieces to frag plugs
4. Put back into tank

Should I do a coral dip, iodine dip, or freshwater dip after fragging?
 
You can’t glue softies to frag plugs.
Elastic bands or putting cuts in a basket with substrate and it will attach itself.
Once some substrate sticks, then you can glue it.
You can dip if you want but not necessary.
 
You can’t glue softies to frag plugs.
Elastic bands or putting cuts in a basket with substrate and it will attach itself.
Once some substrate sticks, then you can glue it.
You can dip if you want but not necessary.
Got it. Forgot about that. I will use rubber bands
 
Rubber bands puts a lot tension on leathers easy to rip through. I like low flow and sit on rubble.
 
What kind of rubble and where can I get it?
if you have dry rock laying around anywhere, or a small rock from your display - you can break apart and use that as rubble. there are some vendors that do sell “rubble”, and thicker sand too
 
I’ve tried rubber bands, toothpick through the base that was rubber banded to a plug but the only thing that worked was putting it in a container with low flow and rock rubble. Might want to toss some carbon in the tank after you frag it.
 
if you have dry rock laying around anywhere, or a small rock from your display - you can break apart and use that as rubble. there are some vendors that do sell “rubble”, and thicker sand too
I don't have anything that could be used as rock rubble. Where could I buy that and the basket?
 
I wrap softy frags with fishing line sometimes to hold them To plugs. A dab of glue on the line to keep it from unraveling and not tied too tight to cut the coral flesh. Razor blade or nail clippers to cut the line off in a week or 2 when it’s attached
 
How long do they normally take to attach? I was thinking of fragging mine and putting a basket of rubble in the return of the sump with a small light if it is only a short time.
 
How long do they normally take to attach? I was thinking of fragging mine and putting a basket of rubble in the return of the sump with a small light if it is only a short time.
From what I have read, max of around 2 weeks.
 
Good point
$30 is pretty expensive for what you need.
You should probably get all you need for $5-$10 in dry rock at your lfs.
 

TOP 10 Trending Threads

WHICH AREA OF REEFKEEPING MOST NEEDS A GENUINE BREAKTHROUGH?

  • Lighting

    Votes: 3 4.6%
  • Pumps and water flow

    Votes: 2 3.1%
  • Water testing and monitoring

    Votes: 21 32.3%
  • Controllers, apps, and device compatibility

    Votes: 8 12.3%
  • Filtration and nutrient export

    Votes: 1 1.5%
  • Automatic feeding

    Votes: 6 9.2%
  • Leak prevention and tank safety

    Votes: 7 10.8%
  • Equipment reliability and repairability

    Votes: 13 20.0%
  • Other (leave a comment in the thread)

    Votes: 4 6.2%
Back
Top
Home
Post thread…
Market
What's new