Rate my parameters

  • Thread starter Thread starter bozo
  • Start date Start date
  • Tagged users Tagged users None

bozo

Well-Known Member
View Badges
Joined
Nov 19, 2015
Messages
523
Reaction score
150
Rating - 100%
2   0   0
Tank volume: 40 gallon total

LPS mainly. Euphyllia, zoas and acans

Age: 2 month old tank
Salt: Fritz RPM Blue Box
ALK: 7.7
CAL: 380
MAG: 1240
NO3: 1
PO4: 0.009
pH: 7.8-7.9
Salinity: 1.026
Temp: 77F - 78F

Dosing:

1. ATI Essentials Pro - 3 mL per day of each bottle
2. Nanno phyto - 14 mL a day
3. Microbacter 7 - 5 mL a day

I do 20 gallon water changes a week

thanks
 
Tank volume: 40 gallon total

LPS mainly. Euphyllia, zoas and acans

Age: 2 month old tank
Salt: Fritz RPM Blue Box
ALK: 7.7
CAL: 380
MAG: 1240
NO3: 1
PO4: 0.009
pH: 7.8-7.9
Salinity: 1.026
Temp: 77F - 78F

Dosing:

1. ATI Essentials Pro - 3 mL per day of each bottle
2. Nanno phyto - 14 mL a day
3. Microbacter 7 - 5 mL a day

I do 20 gallon water changes a week

thanks
you're changing 1/2 the water volume. I wouldnt personally do that. Your alk is a smidge low...calcium low, N03 low...
 
you're changing 1/2 the water volume. I wouldnt personally do that. Your alk is a smidge low...calcium low, N03 low...

Got it.

I’ll dial down the Water change volume on the awc.

For some reason ATI recommends keeping the ALK between 7.0-7.9. I have no idea why. They seem adamant about it. I’ll have to ask them about it.

Im having a hard time raising my CAL and MAG

It’ll take weeks if not months to raise both of these to the appropriate levels.

thanks again
 
I agree I'd boost calcium (to 420 ppm) and magnesium (to 1300 ppm).

I'd feed a bit more or export a bit less N and P. I recommend 2-10 ppm nitrate and 0.03 to 0.1 ppm phosphate, with higher than that range better than below that range.
 
I agree I'd boost calcium (to 420 ppm) and magnesium (to 1300 ppm).

I'd feed a bit more or export a bit less N and P. I recommend 2-10 ppm nitrate and 0.03 to 0.1 ppm phosphate, with higher than that range better than below that range.
Thanks Randy.

I just dosed Ca and Mg to the levels you stated.

Ill start feeding more as well. I’m starting to see some cyano build up in low flow areas, so I hope feeding more will get rid of the cyano.

Should I put my skimmer, nyos 120, on a timer?

I also grow dragons breath, a half cup of gfo in a reactor with low flow, and a 57 watt UV with high flow. All three and the skimmer run 24/7

Thanks!
 
Thanks Randy.

I just dosed Ca and Mg to the levels you stated.

Ill start feeding more as well. I’m starting to see some cyano build up in low flow areas, so I hope feeding more will get rid of the cyano.

Should I put my skimmer, nyos 120, on a timer?

I also grow dragons breath, a half cup of gfo in a reactor with low flow, and a 57 watt UV with high flow. All three and the skimmer run 24/7

Thanks!

I would run the skimmer 24/7 since it does a lot more then nutrient export (such as aeration).
 
I’m a newbie so take my words with a grain of salt, but would it be better to maybe change salt brands instead of dosing this early into the tanks life?

I’m using reef crystals - alk is right around 9, mag 1400, calcium 460, no dosing

I was using petco pre mixed water at first and my mag was around 1250 and calcium around 375. When I switched, my parameters improved over the next couple of weeks.

Edit. I’m going to leave this here but now that im re-reading, I see OP knows a lot more than I do and I probably sound like an idiot lol. There’s probably more to the equation than I understand. I already know Randy’s reputation is stellar as well.
 
I’m a newbie so take my words with a grain of salt, but would it be better to maybe change salt brands instead of dosing this early into the tanks life?

I’m using reef crystals - alk is right around 9, mag 1400, calcium 460, no dosing

I was using petco pre mixed water at first and my mag was around 1250 and calcium around 375. When I switched, my parameters improved over the next couple of weeks.

Edit. I’m going to leave this here but now that im re-reading, I see OP knows a lot more than I do and I probably sound like an idiot lol. There’s probably more to the equation than I understand. I already know Randy’s reputation is stellar as well.
You are correct.. I don’t know the values of the salt he’s using but changing that much water he shouldn’t have to dose anything..
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 15 18.1%
  • Fish or coral food

    Votes: 5 6.0%
  • Test kits or reagents

    Votes: 8 9.6%
  • Filter media or replacement fleece

    Votes: 4 4.8%
  • RO/DI filters or supplies

    Votes: 13 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 12.0%
  • I keep a backup of everything

    Votes: 21 25.3%
  • Other (Post in the comments)

    Votes: 7 8.4%
Back
Top
Home
Post thread…
Market
What's new