rbadger New Waterbox 135.4

rbadger

Community Member
View Badges
Joined
Dec 7, 2015
Messages
89
Reaction score
63
Rating - 0%
0   0   0
Had a leak in my 120G right before Christmas and found a Waterbox 135.4 available locally. Still getting things migrated over, but lover the new Waterbox. More to come, but here's an early shot:

waterbox_full.jpg
 
Very nice!
 
Any pictures of the sump? What are you running down there? Room for reactors?

I use the section to the right of the sump for my GFO/Carbon reactors as well as my dosing pump and containers. I used the ATO section as a fuge by plugging the 1/4 hole and pumping water from skimmer section to fuge section.

3c375eb735aa74392a8d34e84614b512.jpg
 
I use the section to the right of the sump for my GFO/Carbon reactors as well as my dosing pump and containers. I used the ATO section as a fuge by plugging the 1/4 hole and pumping water from skimmer section to fuge section.

3c375eb735aa74392a8d34e84614b512.jpg
Hi I have the same tank and sum. I was wondering if you could help me set up my sump similar to yours. I have never done a refugium and I would love to use the extra box for one.
 
Sure, all I did was get a small cork plug for the hole from the ATO chamber to the return section (got mine at ACE Hardware). Then I simply hooked up a small pump (I used a spare MJ900 I had) with a flexible tubing piece (that I had extra from a BRS reactor) to pump water from the skimmer section to the ATO section. The water then jump overflow the shorter glass baffles back into the return section and skimmer sections. Seems to work just fine as my chaeto is growing fast.
 
Also, I put a bunch of rubble rock in the bottom of the "fuge" area for extra beneficial bacteria.
 
Also, I put a bunch of rubble rock in the bottom of the "fuge" area for extra beneficial bacteria.
Thanks I really appreciate it. I am definitely going to try this out.
 
How is your fuge section working out? Are you getting algae growth in other sections of the sump or on the glass the water is spilling over?
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 8 29.6%
  • Powerheads or wavemakers

    Votes: 2 7.4%
  • Sump or rear filtration chambers

    Votes: 5 18.5%
  • Skimmer or other filtration equipment

    Votes: 1 3.7%
  • Overflow or plumbing

    Votes: 7 25.9%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 3 11.1%
  • Other—tell us what I missed

    Votes: 1 3.7%

New Posts

Back
Top
Home
Post thread…
Market
What's new