The puck lights for the IKEA only came with double sided sticky pads even though the Amazon description says they come with screws. I don’t trust those sticky pads so I put some screws in.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Got the drill stops! Nice!!Equipment purchase. Top photo: 7 PC drill stop collar set. Bottom photo: COR-15, EB8, Kill-A-Watt PS-10, Kamoer dosing container, x3 Apex optical sensors, FMM module, and some fittings for dosing tubing.
Yup, glad to see that you were able to get them, they make a world of difference when you need a set depth
Top photo the one that didn’t load in post #402.I thought I’d share two items I bought from Amazon. A battery powered under cabinet LED for the electronics cabinet within the 250 cabinet. This is for redundancy as I already have main source of light AC powered cabinet LEDs. Then there’s a little lighted screwdriver especially for electronics like the BOB where the screw slots are tiny. (edit: photo didn’t upload)
@RL6723 I made sure they came with a case so they don’t get lost.Yup, glad to see that you were able to get them, they make a world of difference when you need a set depth
@canadianeh cabinet is coming along fine. Waiting for the 12V electromagnetic lock that’s switched by the electrical keyed switch. Yes I’ve been doing a lot of shopping. I’ve got enough parts to keep me busy for awhile. Can’t wait to see your cabinet. I’ve bought a lot of 3D parts printed. Probably enough to justify buying a printer.how's the cabinet coming along? Looks like you have been busy shopping.
My cabinet is done. I am just awaiting for the bracket to mount the Vectra controller on the wall. It has been hard to find the OEM one here in Canada. No one I mean literally no one carry them. I had to ordered a 3D printed one from Ebay and this one also from a guy in the US. I will post picture of my cabinet when I got this one part as right now it seems a bit off to show picture with one controller is not mounted.
What’s the pros of doing this?Got this idea from @RL6723 . Put these fittings on your DOS so you can use 1/4” RO tubing right off the heads.
What’s the pros of doing this?
@canadianeh it converts the DOS head into standard fittings from the stock metric. With the modification you can use all kinds of standard fittings from John Guest brand RO style. And 1/4” tubing.What’s the pros of doing this?