Completely different from the 525 and 450 v1 and v2. Wouldnt attempt to do it without a sump here to play with.I have the Red Sea Reefer 350 with the V3 sump, which measurements would you need to create a 3D design for it?
Sorry
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Completely different from the 525 and 450 v1 and v2. Wouldnt attempt to do it without a sump here to play with.I have the Red Sea Reefer 350 with the V3 sump, which measurements would you need to create a 3D design for it?
Do you have one or 2 klir units??So is anyone making these adapters for sale? I have a 525 XL and a Klir filter I was using on my old set up so would love to still be able to use the Klir filter.
Completely different from the 525 and 450 v1 and v2. Wouldnt attempt to do it without a sump here to play with.
Sorry
Ok, so for guidance if I attempt this myself, the goal is to block off the other opening and create one 4in opening for the Klir?
Depends on your flow. The real goal is to build a wall that will allow the water to rise in order to trigger the water level sensor.
Yes, you have to be able to raise the level in the area where the klir filter will be sitting.Ok, so I’ll need to create a raised wall on the side the tray normally pulls out of to raise the water level in that area when the roller mat clogs to trigger the water level sensor? I think the glass side walls of the filter tray area are high enough.
Do you happen to have the STL file you're willing to share?Have prototype for my reefer 525xl. Still need to tweek a few things but the majority of it is all set. Will have it up and running middle of next week when I get back in town.
No, sorry.Do you happen to have the STL file you're willing to share?
I have the same reefer 350 tank and sump. did u make the adapter in your pics? im looking at using a Klir on my systemHave to knock on wood I’m running klir di-4 for in me Red Sea Reefer 350 V2 sump for 2 weeks with out any problems and I’m loving it.
I have the same reefer 350 tank and sump. did u make the adapter in your pics? im looking at using a Klir on my system
I have a 425xl- wonder if the printed part for the 350 would work. I think sumps are the same but I could be wrong.Yes I 3D print them
The sump is different and will not fit right, other member have files for reefer 450 check the formsI have a 425xl- wonder if the printed part for the 350 would work. I think sumps are the same but I could be wrong.
Is the file on thingsverse?
Thanks!
Thanks but I have the 425xl not 450. The 425xl is the same tank as the 350 but just a couple inches deeper front to backThe sump is different and will not fit right, other member have files for reefer 450 check the forms