rbarr110
Active Member
- Joined
- Oct 31, 2017
- Messages
- 148
- Reaction score
- 81
- Location
- Seattle, WA
- What state or country do you live in
- Washington
I have been running the RedSea ReefATRO for quite a while now, and after having the sensor replaced (apparently an early defect RedSea had identified that was causing early sensor failure) it has been running great....until now. I keep getting a "stalled" error and it shuts down. This is not the "pump ran too long" shutoff.
I have looked at the pump, cleaned it, made sure there are no obstructions, but it keeps stopping after a few hours with the same error. I can tell it to resume and it seems to be pumping water fine, but just eventually stops. Anyone else have this issue, and if so, how do I fix it?
I have looked at the pump, cleaned it, made sure there are no obstructions, but it keeps stopping after a few hours with the same error. I can tell it to resume and it seems to be pumping water fine, but just eventually stops. Anyone else have this issue, and if so, how do I fix it?
