RedSea

[daveiee]

Are redsea really that bad

Im looking at a red sea reefer s-550 or a 425 g3. Are they really that bad or are they good?

 

[keagan]

If you believe Red Sea the G3 series has fixed the past issues with catastrophic seam failures. But they told a lot of people the flimsy seam protectors were enough to keep their tanks seam from failing which happened to alot of those same people. IMO their word means nothing.

 

[exnisstech]

My reefer 170

And my g2 300

My advice is to spend a few minutes searching for redsea seam failures. Personally I would not bring another RS tank into my home if it were free.

 

[Finn450]

I'm on my 5th red sea system...thankfully I've never had an issue. The s550 is a great system...wider than the 425.

 

[EnterName]

First report of a g3 seam failure: https://www.reef2reef.com/threads/red-sea-possible-start-to-seam-failure.1163569/

I had many of their products (including a G1 Reefer which I fortunately replaced with a tank of a different brand before it failed). There is not a single product I would recommend (the salt may be okay, but I don't trust them not to cheap out on the ingredients so I switched salt as well). ReefWaves getting stuck all the time or breaking, AC/DC adapters of ReefLEDs failing frequently, starting to smoke and (fortunately) tripping my GFCI before starting a fire. The skimmer overskimming even though the sensors are cleaned and/or freshly calibrated and the threshold very low. Detritus accumulating on the "neck cleaner" which just makes it fall back into the tank again.

I won't buy a single product from them again.