reef-pi :: An opensource reef tank controller based on Raspberry Pi.

Des Westcott · Jun 30, 2018

I never got to the bottom of it, just went back to 1.5.

But I'm going to grab another SD and try the new 2.0 tomorrow.

Much safer to just have a backup SD than scribing a working one

Ranjib · Jun 30, 2018

Des Westcott said:
I never got to the bottom of it, just went back to 1.5.

But I'm going to grab another SD and try the new 2.0 tomorrow.

Much safer to just have a backup SD than scribing a working one

You should be fine just by taking a copy of the database.

Des Westcott · Jun 30, 2018

I still need to get my head around this lighting thing.

OK if I PM you Ranjib?

Des Westcott · Jun 30, 2018

Ranjib said:
You should be fine just by taking a copy of the database.

Ok. I see what you're saying, but last time I really stressed myself out by not having a running reef tank. With a working card as a backup, I can be running again in seconds.

Ranjib · Jun 30, 2018

Des Westcott said:
I still need to get my head around this lighting thing.

OK if I PM you Ranjib?

Sure.

Ranjib · Jun 30, 2018

Hello friends,
I have cut another beta release, 2.0.0-beta-4. Changes include:
Bugfix:

Fix dashboard chart loading
Fix ato name in ato chart
Fix sign-in screen issue when auth fails.

Features:

Upgrade styles to bootstrap 4
Bring in responsive tabs for mobile
Introduce "expand" tabs for all probes, sensor etc

Release builds can be found in usual page: https://github.com/reef-pi/reef-pi/releases/tag/2.0.0-beta-4

I expect a few more 2.0.0 beta releases, since we are upgrading the UI to be more mobile-friendly, as well as increase test coverage.

Erica-Renee · Jun 30, 2018

I shall give this a Headless Zero test tomorrow . During Breaks between running tiller on pond landscaping..

Ranjib · Jun 30, 2018

Erica-Renee said:
I shall give this a Headless Zero test tomorrow . During Breaks between running tiller on pond landscaping..

Thank you :-) , you are the best

Erica-Renee · Jun 30, 2018

Ranjib said:
Thank you :) , you are the best

I Never mad it to return the pi today. I worked about 4 hours in the hot sun 14 foot up on a pic board stretched across ladder jacks on two extension ladders .. It was 100 deg out . the surface i was working on was to hot to touch. I think i work to much for my own good but its part of working for yourself.. sometimes.. GRRR

Ranjib · Jun 30, 2018

Erica-Renee said:
I Never mad it to return the pi today. I worked about 4 hours in the hot sun 14 foot up on a pic board stretched across ladder jacks on two extension ladders .. It was 100 deg out . the surface i was working on was to hot to touch. I think i work to much for my own good but its part of working for yourself.. sometimes.. GRRR

100 degree ... wow :-/ . I feel lucky to be in Silicone Valley, its sunny and 78 here :),

Erica-Renee · Jun 30, 2018

Ranjib said:
100 degree ... wow :-/ . I feel lucky to be in Silicone Valley, its sunny and 78 here :),

I think we are in for a Rough summer... But i am working on bidding a nice inside Reno job..if they move forward right away i will push back some of my exterior work...Or start subbing some of it out

ReeferMadness88 · Jul 1, 2018

Hey Ranjib, been a while since I’ve checked into, I’ve been running 1.4 for a while now but today when I updated to the new 2.0.0 I’m getting a browser error and no screen loading. I’m getting an error that states: GET API call failure. Details:{“URL”:”/API/info”}. Any guidance?

ReeferMadness88 · Jul 1, 2018

Hey Ranjib, been a while since I’ve checked into, I’ve been running 1.4 for a while now but today when I updated to the new 2.0.0 I’m getting a browser error and no screen loading. I’m getting an error that states: GET API call failure. Details:{“URL”:”/API/info”}. Any guidance?

ReeferMadness88 · Jul 1, 2018

Hey Ranjib, been a while since I’ve checked into, I’ve been running 1.4 for a while now but today when I updated to the new 2.0.0 I’m getting a browser error and no screen loading. I’m getting an error that states: GET API call failure. Details:{“URL”:”/API/info”}. Any guidance?

ReeferMadness88 · Jul 1, 2018

Woah, I have no idea why that tripled posted. Very sorry. Thanks iPhone

Ranjib · Jul 1, 2018

ReeferMadness88 said:
Hey Ranjib, been a while since I’ve checked into, I’ve been running 1.4 for a while now but today when I updated to the new 2.0.0 I’m getting a browser error and no screen loading. I’m getting an error that states: GET API call failure. Details:{“URL”:”/API/info”}. Any guidance?

which release version your are using? can you install 2.0.0-beta-4 ? This is a major version bump, and you are likely to need recreate everything

ReeferMadness88 · Jul 1, 2018

Sounds great, thanks for the quick reply, I honestly was about to do that anyways however I thought for the ease of saving the existing settings if it was a simple overlooked thing I would make the correction, no problem at all I’ll make a fresh copy later! Have an awesome weekend and thanks again for the support and the continued improvements!