reefbreeder prism ato issue

Mschmidt

Average Maybe
View Badges
Joined
Feb 9, 2022
Messages
14,316
Reaction score
31,852
Location
Baltimore
Rating - 0%
0   0   0
Last night I noticed that my ATO was no working. I cleaned the prism (vinegar soak and wiped with a microfiber cloth) and messed with the plugs. As I type I realize I can hook up a multimeter to see if there is power the whole way through, but that will have to wait till this evening or tomorrow after work. It also looked like there was some water in the prism, between the glass and the lens. The seals looked good and nothing was loose, but I did take some pictures that may or may not help.

Is there something I could be missing? is there a solution outside warranty that I should try?
 
OP
OP
Mschmidt

Mschmidt

Average Maybe
View Badges
Joined
Feb 9, 2022
Messages
14,316
Reaction score
31,852
Location
Baltimore
Rating - 0%
0   0   0
Pic.
IMG_20230531_202216219_HDR.jpg
 

Petcrazyson

5000 Club Member
View Badges
Joined
Apr 21, 2022
Messages
5,613
Reaction score
19,462
Location
Clermont, FL
Rating - 0%
0   0   0
Last night I noticed that my ATO was no working. I cleaned the prism (vinegar soak and wiped with a microfiber cloth) and messed with the plugs. As I type I realize I can hook up a multimeter to see if there is power the whole way through, but that will have to wait till this evening or tomorrow after work. It also looked like there was some water in the prism, between the glass and the lens. The seals looked good and nothing was loose, but I did take some pictures that may or may not help.

Is there something I could be missing? is there a solution outside warranty that I should try?

edit:
 

Petcrazyson

5000 Club Member
View Badges
Joined
Apr 21, 2022
Messages
5,613
Reaction score
19,462
Location
Clermont, FL
Rating - 0%
0   0   0
Last night I noticed that my ATO was no working. I cleaned the prism (vinegar soak and wiped with a microfiber cloth) and messed with the plugs. As I type I realize I can hook up a multimeter to see if there is power the whole way through, but that will have to wait till this evening or tomorrow after work. It also looked like there was some water in the prism, between the glass and the lens. The seals looked good and nothing was loose, but I did take some pictures that may or may not help.

Is there something I could be missing? is there a solution outside warranty that I should try?
Is it possible too much air is being sucked in?
 

tbrown

Nominated Cronie Intern - Might be failing?
View Badges
Joined
Nov 22, 2019
Messages
50,936
Reaction score
112,526
Location
Peoria, AZ
Rating - 100%
2   0   0
Not sure how yours is but my solenoid has, on occasion, done the same thing. I disconnect the inlet hose and find some debris blocking the solenoid. I've had to clean it 4 or 5 times in the last 7-8 months that I've had it.
 

Townes_Van_Camp

Valuable Member
View Badges
Joined
Apr 14, 2021
Messages
1,994
Reaction score
3,277
Location
Jacksonville, FL
Rating - 0%
0   0   0
Not sure how yours is but my solenoid has, on occasion, done the same thing. I disconnect the inlet hose and find some debris blocking the solenoid. I've had to clean it 4 or 5 times in the last 7-8 months that I've had it.
I have a couple of their sensors that I've replaced over the years. I may see if that's all they need.
 

tbrown

Nominated Cronie Intern - Might be failing?
View Badges
Joined
Nov 22, 2019
Messages
50,936
Reaction score
112,526
Location
Peoria, AZ
Rating - 100%
2   0   0
All this talk about ATOs and mine stopped. Took off the tubing and it had scum in it again.
 

tbrown

Nominated Cronie Intern - Might be failing?
View Badges
Joined
Nov 22, 2019
Messages
50,936
Reaction score
112,526
Location
Peoria, AZ
Rating - 100%
2   0   0
Was packed well,
IMG_20230612_202312936_HDR.jpg


And just in time. My wife's water broke, so we're at the hospital 3 weeks early.
Good luck No Mo Faux Pa! My son was 4 weeks and 1 day early - technically premie because ofnth 1 day.
 

Good trouble: Have mushrooms ever become pests in your aquarium?

  • Mushrooms would never be pests even if they kept replicating.

    Votes: 28 16.7%
  • Mushrooms have not become a pest for me.

    Votes: 69 41.1%
  • Mushroom have become overgrown, but not to the point of becoming pests.

    Votes: 25 14.9%
  • Mushrooms have become pests in my aquarium.

    Votes: 36 21.4%
  • Other.

    Votes: 10 6.0%
Back
Top