Jeeperz
Valuable Member
- Joined
- Sep 28, 2019
- Messages
- 1,637
- Reaction score
- 1,065
- What state or country do you live in
- Idaho
Front glass bow isn't real bad. I'll try to get pic this weekend. I'd feel better if there was no bow. Even the back has a bit of bow.
The xl have a plywood stand but if they are put together the same as the non xl there are engineering issues. The top panel on the 350 sits between the two upright end panels, extreme week point considering the fasteners. The back panel is several panels and no way to level the stand, especially in the middle of the sump divider.
For equipment I have a simplicity dc1900 return pump, don't recommend that as it doesn't have a lot of flow at 100%. I also have a simplicity dc120 skimmer that I also don't recommend as no matter what I do it won't stop with the bubbles in the display, even after 2 months.
The xl have a plywood stand but if they are put together the same as the non xl there are engineering issues. The top panel on the 350 sits between the two upright end panels, extreme week point considering the fasteners. The back panel is several panels and no way to level the stand, especially in the middle of the sump divider.
For equipment I have a simplicity dc1900 return pump, don't recommend that as it doesn't have a lot of flow at 100%. I also have a simplicity dc120 skimmer that I also don't recommend as no matter what I do it won't stop with the bubbles in the display, even after 2 months.
