Reefmat 500 Mod into Waterbox 145.5 Sump

  • Thread starter Thread starter C4Rez
  • Start date Start date
  • Tagged users Tagged users None

C4Rez

Community Member
View Badges
Joined
Jul 26, 2022
Messages
74
Reaction score
70
Location
Gilroy
What state or country do you live in
California
Rating - 0%
0   0   0
Wanted to help some folks interested in modifying their sump for the new Reefmats from Redsea (specifically the Reefmat 500 for the Waterbox 145.5 & 16).

4CB2FEF7-9268-4D39-A608-B258E08A8515.jpeg Sump is dry. Was a little hesitant to modifying a new sump, but I really don’t want to deal with socks and/or floss again.

Tip* Buy the Redsea Mod Kit. The thin blades help a lot. Waterbox did a heck of a job sealing in the sock section. The glass partitions are a tight fit. Just take your time.


23F5A6C4-8601-4923-B56B-1A29CE9D7DD7.jpeg
2DA8E417-3AF2-4611-B959-5A3AC77CAC5E.jpeg

The internal sock section is about 7.5” wide. The Reefmat 500 needs a minimum 7.25” to hang. Utilizing the legs in this configuration will not work. It fits great hanging; secure.

B643F5A9-ED38-4A54-A7DA-8FB8B368FCDF.jpeg F7EF96B9-38E3-40EF-8E5E-19594D61BFBC.jpeg

Overall, I’m really happy with the outcome. Can’t wait to get things going.

Hope this helps!
 
You should post an image or two showing how you hooked up the overflow(s) to the ReefMat.
Will do! I’ll be setting up the plumbing next week. Just wanted to let others know that the 500 can fit in the sock section.
 
Found time to plumb today.

Had to remove the entry glass partition of the sock section. Otherwise no modifications needed to the Waterbox pipes.

331CAEE5-F5D9-4A3B-A2F3-7941B86C2849.jpeg

Waterbox provided a 32mm adapter. Used it with the Hose Connecter that came with the Reefmat. Then, just primed/cement it to the end of the main drain. Hose was cut to size.

1A2589FD-5DD8-40CC-975D-BBA3C257F51F.jpeg
727B2483-F0BD-46D7-9CFF-199B7BF659A4.jpeg
3DEAE6DB-F29D-416D-8F64-1EEAFF72B6DB.jpeg
 
i just cut the main pipe and used the union with adjustable tubing. i didn't like cutting out the glass. nice job on yours
 
Great improvement. I just got a WB 145.5 too but the reefmat is out of stock. Keep us posted and how everything perform.
 
So glad to see this! Put the final nail in the coffin on making the decision to do this. Just gonna be wet!
 
lol also pulled the nail out after failed glass removal when one piece started to chip on me. will work on other options for better preparedness!
 
Wanted to help some folks interested in modifying their sump for the new Reefmats from Redsea (specifically the Reefmat 500 for the Waterbox 145.5 & 16).

4CB2FEF7-9268-4D39-A608-B258E08A8515.jpeg Sump is dry. Was a little hesitant to modifying a new sump, but I really don’t want to deal with socks and/or floss again.

Tip* Buy the Redsea Mod Kit. The thin blades help a lot. Waterbox did a heck of a job sealing in the sock section. The glass partitions are a tight fit. Just take your time.


23F5A6C4-8601-4923-B56B-1A29CE9D7DD7.jpeg
2DA8E417-3AF2-4611-B959-5A3AC77CAC5E.jpeg

The internal sock section is about 7.5” wide. The Reefmat 500 needs a minimum 7.25” to hang. Utilizing the legs in this configuration will not work. It fits great hanging; secure.

B643F5A9-ED38-4A54-A7DA-8FB8B368FCDF.jpeg F7EF96B9-38E3-40EF-8E5E-19594D61BFBC.jpeg

Overall, I’m really happy with the outcome. Can’t wait to get things going.

Hope this helps!
Nice write up. Im trying to do this to a peninsula 4820 sump but that has only one filter sock section. What is the required minimum length for the reefmat? Id greatly appreciate it!!
 
Sorry about the late response @danzig !

I had to look up your sump. It looks like the sock area shares the same glass wall with the return pump. I wouldn’t remove it just to fit the ReefMat. It may ruin the flow design of the sump. Unfortunately the ReefMat 500 requires atleast 7.5” x 12” to accommodate the hose for my setup. Your sock area on the website measures 7.7”x9.4;” that would be a tight fit as the hose bends. Possible? Maybe. Just not sure from my standpoint.

However, there are other filter rollers that may fit just in that one sock area. I haven’t done the research though. Goodluck.
 
Last edited:

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 24.1%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.3%
  • I’d rather get a gift card and pick it myself

    Votes: 44 40.7%
  • I’d prefer gear or supplies instead

    Votes: 2 1.9%
  • Please don’t surprise me with livestock

    Votes: 27 25.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new