Rinsing filter media and foam sponge or replace?

GR00VY

Active Member
View Badges
Joined
Aug 27, 2019
Messages
233
Reaction score
83
Rating - 0%
0   0   0
I have an aquaclear 70 and was wondering should I swish my foam sponge around in some saltwater to keep it from losing any beneficial bacteria? Or should I replace or rinse it out in a sink?

Second, what about the bio max? How often to replace it and do is it beneficial to replace it all or just 50 percent?

Thanks
 

John Robbins

Community Member
View Badges
Joined
Jul 3, 2019
Messages
69
Reaction score
56
Rating - 0%
0   0   0
It is generally best to clean the sponge in saltwater as you mentioned. That way, you keep the beneficial bacteria. I would do the same with the biomax if it is filling with detritus. I wouldnt bother replacing either one until they start to physically break down but just clean them as mentioned as needed.
 

W1ngz

Failed Padawan
View Badges
Joined
Jan 10, 2019
Messages
2,307
Reaction score
3,789
Location
Montreal, Canada
Rating - 0%
0   0   0
If you have live rock in the tank you don't need the bio filtration in the filter, that's freshwater stuff. Swish out the foam block in some old tank water and replace the bio media with some carbon if you like, or another sponge or some filter floss for added mechanical filtration.
 
OP
OP
G

GR00VY

Active Member
View Badges
Joined
Aug 27, 2019
Messages
233
Reaction score
83
Rating - 0%
0   0   0
It is generally best to clean the sponge in saltwater as you mentioned. That way, you keep the beneficial bacteria. I would do the same with the biomax if it is filling with detritus. I wouldnt bother replacing either one until they start to physically break down but just clean them as mentioned as needed.

Thanks
 
OP
OP
G

GR00VY

Active Member
View Badges
Joined
Aug 27, 2019
Messages
233
Reaction score
83
Rating - 0%
0   0   0
If you have live rock in the tank you don't need the bio filtration in the filter, that's freshwater stuff. Swish out the foam block in some old tank water and replace the bio media with some carbon if you like, or another sponge or some filter floss for added mechanical filtration.

Good to know. I picked up a nitrogen reducing pad because my nitrates were a bit high at 30-40ppm. My ammonia is at zero according to the Seachem badge and my nitrites were at 0.
 

W1ngz

Failed Padawan
View Badges
Joined
Jan 10, 2019
Messages
2,307
Reaction score
3,789
Location
Montreal, Canada
Rating - 0%
0   0   0
Good to know. I picked up a nitrogen reducing pad because my nitrates were a bit high at 30-40ppm. My ammonia is at zero according to the Seachem badge and my nitrites were at 0.

Those pads will help get things under control. But you don't want to bottom out the nitrates either. While you're getting them under control you have some time to figure out the cause, maybe overfeeding, or if you're like me with my office tank, I'm super lazy with the water changes...
 
OP
OP
G

GR00VY

Active Member
View Badges
Joined
Aug 27, 2019
Messages
233
Reaction score
83
Rating - 0%
0   0   0
Those pads will help get things under control. But you don't want to bottom out the nitrates either. While you're getting them under control you have some time to figure out the cause, maybe overfeeding, or if you're like me with my office tank, I'm super lazy with the water changes...

It’s over feeding if I had to guess. I only have 2 clowns in this tank but they like to eat nonstop. Problem is that a lot goes uneaten. I need to balance it better. I am going to use the pad until I get the levels good and come up with a better feeding schedule.
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 37 27.6%
  • 100% dry rock + 100% live sand

    Votes: 45 33.6%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 30 22.4%
  • 75% live rock, 25% live sand

    Votes: 12 9.0%
  • 25% live rock, 75% live sand

    Votes: 10 7.5%
Back
Top