RO buddie 4 stage

  • Thread starter Thread starter TxReefer21
  • Start date Start date
  • Tagged users Tagged users None

TxReefer21

Well-Known Member
View Badges
Joined
Jan 17, 2021
Messages
754
Reaction score
416
Location
Dallas, Tx
What state or country do you live in
Texas
Rating - 0%
0   0   0
Had my ro buddie 4 stage ro - di unit for about a month now I just got a TDS meter to read what it was and it’s coming out to 18PPM I haven’t gotten the chance to test my city water yet but I will in a bout a hour and half. I’ve read here where using older Containers or just some that had been dirty or debri in them could cause a fluctuation in TDS ppm readings. Does anyone have this unit did you change the membrane ? I’m at lost what to do my tank is growing some Dino / cyno this week after using the unit / water for about a month or so making my own water fritz salt blue box and using the water for top Off
 
Last edited:
- Check to make sure the TDS probe is properly installed
- Did you check the reading immediately after turning on the tester because leftover water in the RO system will have some TDS buildup due to it sitting around.
- I know you had it for a month but it depends on how much water you run through it not how long you've had it.
-Test TDS coming In vs. Out like you said, could be very very dirty water.
- check ti make sure all membranes and resins are installed correctly and resin(if color changing) has changed colors or not, if so you may want to change the resin, I hear a lot of people getting a 2nd membrane unit for better results as well.
- after checking all your lines and proper installation and maintenance/refilling resin and what not and you still get a high TDS read, bring some water to a LFS to see if they can test the TDS to see if your sensor is broken.
-If all else fails you may have a faulty unit that's leeching some water through it all.
 
- Check to make sure the TDS probe is properly installed
- Did you check the reading immediately after turning on the tester because leftover water in the RO system will have some TDS buildup due to it sitting around.
- I know you had it for a month but it depends on how much water you run through it not how long you've had it.
-Test TDS coming In vs. Out like you said, could be very very dirty water.
- check ti make sure all membranes and resins are installed correctly and resin(if color changing) has changed colors or not, if so you may want to change the resin, I hear a lot of people getting a 2nd membrane unit for better results as well.
- after checking all your lines and proper installation and maintenance/refilling resin and what not and you still get a high TDS read, bring some water to a LFS to see if they can test the TDS to see if your sensor is broken.
-If all else fails you may have a faulty unit that's leeching some water through it all.
So I measured my TDS from tap and was reading 237PPM I turned on my RODI unit and put it in a clean paper up and it then read 1ppm … so I’m not sure what’s happening but I’m going to try and get a clean new bucket today to retest in
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.4%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 25 37.3%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.4%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new