So I have not changed my filters for about 2 or so years, both my inline TDS meter and handheld TDS meter still read zero. My question is, do I need to replace them?
RO/DI Replacement Filters
- Thread starter Shep
- Start date
- Tagged users None
Crabs McJones
I'm so shi-nay
Excellence Award
Reef Tank 365
Article Contributor
Moderator Emeritus
Hospitality Award
Reef Tank 365 Boss
Wisco Reefers
My Tank Thread
Are you referring to your membrane or your pre-filters?
Crabs McJones
I'm so shi-nay
Excellence Award
Reef Tank 365
Article Contributor
Moderator Emeritus
Hospitality Award
Reef Tank 365 Boss
Wisco Reefers
My Tank Thread
Sediment filters and carbon filters should be replaced every 6 to 10 months depended on the water quality where you live, ro membranes are approximately every 2 to 3 years. Best way to tell is to have a pressure gauge between your last carbon block and ro membrane, and when the pressure drops it's time to change the pre-filters
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
- Joined
- Sep 5, 2014
- Messages
- 67,509
- Reaction score
- 63,929
The TDS is just tracking the function of the DI.
The sediment filter should be changed on the basis of pressure after it, or on the total water flow rate getting too low.
The carbon cartridge (which serves to remove chlorine and protect the membrane), would typically be replaced based on gallons through it, or getting clogged, etc.
Don't replace the RO membrane unless flow gets too low, or it fails with a hole, etc.
The sediment filter should be changed on the basis of pressure after it, or on the total water flow rate getting too low.
The carbon cartridge (which serves to remove chlorine and protect the membrane), would typically be replaced based on gallons through it, or getting clogged, etc.
Don't replace the RO membrane unless flow gets too low, or it fails with a hole, etc.
Similar threads
