RODI System Issue

[Bluejillo]

I bought a used RODI unit from here some time ago and just now got around to setting it up. I noticed one of the tubes was broken off of the membrane housing. Not really thinking it would work (it didnt) i tried caulking it back together.

If its fixable, what should i use to glue this back together?

Also the first canister (sediment filter) leaks profusely and the O ring looks fine, could it just not be tight enough on there?

Any help is appreciated

 

[Water Dog]

If you think you can somehow unscrew the broken off base, then the replacement part is a 1/4” John Guest or Murlok quick connect to MNPT elbow...

https://www.bulkreefsupply.com/mur-lok-ro-elbow-male-npt-x-push-connect.html

If the broken base won’t come off, you’ll need the new elbow piece, the 2 good elbow pieces and a new RO membrane housing...

https://www.bulkreefsupply.com/standard-ro-membrane-housing.html

 

[Bluejillo]

If you think you can somehow unscrew the broken off base, then the replacement part is a 1/4” John Guest or Murlok quick connect to MNPT elbow...

https://www.bulkreefsupply.com/mur-lok-ro-elbow-male-npt-x-push-connect.html

If the broken base won’t come off, you’ll need the new elbow piece, the 2 good elbow pieces and a new RO membrane housing...

https://www.bulkreefsupply.com/standard-ro-membrane-housing.html

Snapped clean off, no way of getting that out. Ordered a new housing and elbow :/

 

[Water Dog]

Hey, I just noticed on the specs of the membrane housing that they use a 1/4” push connect x 1/8” MNPT elbow...

 

[Bluejillo]

Hey, I just noticed on the specs of the membrane housing that they use a 1/4” push connect x 1/8” MNPT elbow...

Yeah, i got what they recommended on the page for the membrane housing so it should be the right one :)