Salinity Increase.

gbroadbridge

2500 Club Member
View Badges
Joined
Mar 25, 2021
Messages
4,018
Reaction score
4,181
Location
Sydney, Australia
Rating - 0%
0   0   0
Using a balanced two part recipe (Sodium Carbonate/Calcium Chloride) results in an increase in Salinity over time given no regular water change.

Say I'm adding 250ml each component per day, what would be the amount of tank water to be replaced with RODI per day?
Is there a simple equation, or is it simply a matter of replacing 250ml of tank water with RODI daily?
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
67,349
Reaction score
63,691
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
Since it is not the only thing impacting salinity (skimmers reduce it, for example), I’d take it as a very rough guide only.

From my recipe article;

After one year of adding 8 ppm of calcium and the accompanying 0.4 meq/L (1.1 dKH) of alkalinity per day (41 mL of both parts per day or 4 gallons of both parts per year in a 50-gallon aquarium, including the effect of the magnesium sulfate solution, 2440 mL/year), the following residue (Table 3) would remain after calcification and adjustment for salinity (there is roughly a 29% rise in salinity over a year using this addition rate without water changes).

Thus, 1 dKH per day requires removal of about 0.072% of the tank volume daily and replace by ro/di. That’s 0.5% weekly.
 

Creating a strong bulwark: Did you consider floor support for your reef tank?

  • I put a major focus on floor support.

    Votes: 53 40.2%
  • I put minimal focus on floor support.

    Votes: 27 20.5%
  • I put no focus on floor support.

    Votes: 48 36.4%
  • Other.

    Votes: 4 3.0%
Back
Top