Salmonshutters' 30 Gallon Rimless Cube

shallow tank - best advice i can give you (mine is 12" deep as well) STAY AWAY from the sugar sand.

1" of the carib sea special grade sea floor. Its the largest sand sifting safe sand and small enough that crap will stay on top of it. I have to siphon 2" of sugar sand from my tank (60lbs+) to swap in that the carib sea stuff. Its just wont stop blowing around and my tanks been setup for 5 weeks now.
 
shallow tank - best advice i can give you (mine is 12" deep as well) STAY AWAY from the sugar sand.

1" of the carib sea special grade sea floor. Its the largest sand sifting safe sand and small enough that crap will stay on top of it. I have to siphon 2" of sugar sand from my tank (60lbs+) to swap in that the carib sea stuff. Its just wont stop blowing around and my tanks been setup for 5 weeks now.

I know, I've made that mistake before. It blew around like crazy in the 15 that i had and I hated it, it didn't help that I had a pistol shrimp that threw it around everywhere.
 
Do you think a 700 gallon per hour mag drive pump be a good pump for a return, with enough flow to not have any powerheads?
 
I have it almost all plumbed except for half of the sump and the plumbing from the pump to the outlets.

0718111929.jpg
 
Do you think a 700 gallon per hour mag drive pump be a good pump for a return, with enough flow to not have any powerheads?

You could splurge a bit and buy a higher GPH water blaster pump. You can always throttle it back to lower the GPH and electric consumption.

For the rock towers some of the BRS reef saver rock would work well, along with a bit of their rubble rock.

I know it's all plumbed but you might want to consider spraying your PVC in the tank black with some krylon fusion paint. I know most of it will be covered with rock but the black will help conceal it. The white may stick out and attract some algae growth.

Looks great though, can't wait to see it up and running!
 
I actually haven't glued the parts to the bulk heads yet because of that reason, I may even epoxy and sand cover it to allow it to blend in even more.
 
i plan to have 2-3 really nice bubble tips, and then mostly lps with a few nice sps up top. I'm thinking about changing the outlet to go straight back and then put a 90 degree elbow to go to the overflow, so I can have more of a l shape for aqua scaping. Which will leave more room on the sand bed for lobos and plates, and what not lol
 
Sounds awesome so more of a mixed reef! I am too scared to have anemones with other corals or I would totally do it. I am going to follow this thread to see any tricks to keep them in place!
 
wow looks really good! and now looking at all these cubes its making me wanna switch my tank out for one lol
 
I'm thinking of doing uniseals for my bulk heads on the ten gallon for the sump so i can run two side by side without a lot of space in between them. I've broken two already trying to connect them with one bulkhead so if i can find them and get them fairly soon I will do that otherwise I will be going with a 5.5 gallon with an external pump.
 
You could cut down those bulkheads or buy low profile bulkheads, would make it a bit easier. It looks like a real tight fit.
 
i have about an inch to work with so i don't think bulk heads will work. I'm also curious on how well the uniseals work, they look real easy to install. Hopefully they don't leak overtime or have problems with them leaking. Today I was working on covering the overflow and the outlets with sand to help it blend in more.

0719111651.jpg
 
Last edited:
Here is a picture of them completed in the tank. Let me know what you think, I still want to add a lock line nozzle to the end of the returns so i have some ability to change the flow around.

0719111730.jpg
 
Took some new photos today of the tank up and running. I currently sealed the bulkheads to run it without a sump due to my current budget. I'm pretty happy with how its looking now.

IMG_0048.jpg


IMG_0049.jpg


IMG_0051.jpg

Here you can see the whole setup.
 
very awesome concept. i have the same goal for my 24x24x12 rimless, nothing hanging over the top of that rimless glass. why do you have the hang on? throw a filter sock on your sump and your good. do you plan on getting a mp10?

*edit*
op just saw that about your budget. understand now lol.
 
It has been quite a while since my last update on here. I have a few months of progress.......so here it goes.

New photos as of 9/22/13


FTS
DSCF8404_zps2cb0e00f.jpg



JF Glowstick Chalice and some rastas
DSCF8406_zps40e80633.jpg



Front
73cc3476-7e34-4f02-9b1e-758f561788bc_zpsdcc931b4.jpg



Side
DSCF8408_zps1c3a0c5f.jpg



My fish : 2 clowns (1 picasso and 1 platinum)
3 Blue-green Chromis
DSCF8410_zpsa8010498.jpg



2 clowns in the sump (2 fancy whites) May be parting with these.
DSCF8427_zps0961821c.jpg


I figured it was about time for an update. I rearranged the rock work last week and I'm much happier with it. I do think I could add a few more pieces however.


45a668c9-b826-473a-8e5f-d33ff00f2ff9_zpsb9ebb25e.jpg



DSCF8464_zps04ae6c6b.jpg



Front
DSCF8466_zps2b8b487e.jpg



Right
DSCF8465_zpsb6ed4bbf.jpg



Left
DSCF8467_zps39cd48a9.jpg



Few acan frags
DSCF8472_zps0aaecf79.jpg



JF Jack-o-lantern front left, JF Glowstick Chalice center, Rastas on the right
DSCF8471_zps636b913e.jpg



My most prized acan, first acan frag ever and I still have it after losing half of it twice. Orginally got it from Jason and now its starting to get its green back from the lighting.
DSCF8470_zpsd02d7ece.jpg



Frag of JF Glowstick chalice if someone is interested.
DSCF8469_zps410cc0d7.jpg



Brian's Baby Watermelon front left, Sickly Pink ******* front middle, Purple Erkle front right, Random Acan frags in the back.
DSCF8468_zpsb68610f9.jpg
 
Newest Addition to the aquarium......Pipefish!


I have had him since the middle of October. Has been eating cyclopeeze since day one.


DSCF8479_zpsf8cb18c8.jpg



DSCF8477_zpsfefc1306.jpg


I got some new corals in today. I'm gonna give some sps a try. I have been successful with my first two frags I received a few months ago. I also got a new bubble tip anemone. It has some real bright pink tips.


New FTS
DSCF8513_zpsa06fea76.jpg



Two of the new frags one in the front and one behind.
5a87b835-8a03-462c-b534-686b3390e04f_zps18004be9.jpg



New anemone in the middle of the other two.
DSCF8507_zps035d7f6c.jpg



Moved some frags from plugs to a new rock, have a little algae growth because the rock was dry. :-??
DSCF8512_zps39395688.jpg



One of the nem.
DSCF8509_zpscd93fbd4.jpg


Took some new photos to document some additions to the tank. I have been really happy with coral growth recently. I feel some of my newer sps pieces are starting to grow a bit.


DSCF8523_zpsf64839f5.jpg



DSCF8522_zps0642c162.jpg



DSCF8520_zps0f790acf.jpg



DSCF8519_zps0d62807b.jpg



DSCF8525_zps3678f1e4.jpg
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 15 34.9%
  • I’d trust someone who knows my tank to choose

    Votes: 1 2.3%
  • I’d rather get a gift card and pick it myself

    Votes: 14 32.6%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 13 30.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new