Sam's Oceanic 120 - DIY solutions

Mhamilton0911

BitterSalty
View Badges
Joined
Jul 8, 2021
Messages
4,260
Reaction score
20,194
Location
Idaho
Rating - 0%
0   0   0
The before and after photos of my algae-scrub session are nuts... It was no short order but after neglecting my family for longer then I should have I feel accomplished.
My Phyto had all gotten contaminated so I sterilized everything and restarted a batch.
Dealt with my reactors too... changed the carbon, removed a ton of the GFO and restarted... Flushed it into a bucket before connecting it to the sump even...
I'll be turning it off in a bit when I dose ChemiClean tonight.
IMG_2512(1).JPEG IMG_2509(1).JPEG IMG_2510(1).JPEG IMG_2511(2).JPEG
The filter sock holder hooked me up...
IMG_2507(1).JPEG
I wish I spent the extra few bucks on better wood for the stand... this pine wasn't very accurate dimensionally so I have a big filling & sanding step...
IMG_2506(1).JPEG IMG_2505(1).JPEG

Started seeing my DI resin being used now so at least the issue with TDS != 0 is solved.
Agree that pine sucks, totally good for rough work or objects that don't require perfection, like random furniture and such, but hardwood would have been much closer to spec. I hate buying wood right now, so darn expensive. I literally live in dense Idaho forests, where there are more logging trucks on the road than regular cars, there's a mill in every town and sometimes two, but I can't buy any project wood for decent prices. Grrrr. Makes me a Grinch.
 
OP
OP
Projects with Sam

Projects with Sam

5000 Club Member
View Badges
Joined
Dec 2, 2021
Messages
6,746
Reaction score
27,031
Location
Western Springs, IL
Rating - 100%
3   0   0
Did the 20% water change after 48hrs of ChemiClean last night. Cleaned the sump a little and got rid of my old filter floss. smells a lot better... 30 gallons of water didnt change any levels significantly. GFO'd my PO4 to .25 again and will leave there for a bit before lowering.
IMG_2515(1).JPEG IMG_2529.JPEG IMG_2527.JPEG IMG_2530.JPEG IMG_2531.JPEG IMG_2532.JPEG
 
OP
OP
Projects with Sam

Projects with Sam

5000 Club Member
View Badges
Joined
Dec 2, 2021
Messages
6,746
Reaction score
27,031
Location
Western Springs, IL
Rating - 100%
3   0   0
The sweet Kenya tree I got from WWC that Timmy doesn't eat just bud! I found the small one inmy MP40. The larger one just popped off the tree when I messed with it a little.
IMG_2500(2).JPEG IMG_2502(1).JPEG IMG_2540(1).JPEG IMG_2539(1).JPEG IMG_2537.JPEG
I have them restrained by loose loops of fishing string crazy glued to the rock. will cut away the string once they've attached.
 
OP
OP
Projects with Sam

Projects with Sam

5000 Club Member
View Badges
Joined
Dec 2, 2021
Messages
6,746
Reaction score
27,031
Location
Western Springs, IL
Rating - 100%
3   0   0
Looks like I'll be getting a third bud! (the big fat arm up front will eventually float free.)
IMG_2545(1).JPEG

Clam gunna do what clam gunna do. HOpe I'm not killing it...
He vacated his disk and left this behind:
IMG_2542(1).JPEG
it was in a bad spot so I put it on another throne... and it moved again:
IMG_2543(1).JPEG IMG_2546(1).JPEG
less light more light? I dunno...
have been keeping everything pretty stable except PO4...
 
OP
OP
Projects with Sam

Projects with Sam

5000 Club Member
View Badges
Joined
Dec 2, 2021
Messages
6,746
Reaction score
27,031
Location
Western Springs, IL
Rating - 100%
3   0   0
New Product almost complete! CO2 scrubbing for the masses!

It'll be up on ParlAquatics soon:

SkimmerCO2CapSmall_01.png
SkimmerCO2CapSmall_02.png


SkimmerCO2CapSmall_03.png
SkimmerCO2CapSmall_04.png


just a cap that instead of CArbon, you put co2 scrubbing media... airline just compression fits into hole in lid of cap and goes to skimmer air intake...
Now most folks can find the space to do recirculating CO2 scrubbing.
 

tbrown

Nominated Cronie Intern - Might be failing?
View Badges
Joined
Nov 22, 2019
Messages
48,466
Reaction score
101,480
Location
Peoria, AZ
Rating - 100%
2   0   0
New Product almost complete! CO2 scrubbing for the masses!

It'll be up on ParlAquatics soon:

SkimmerCO2CapSmall_01.png
SkimmerCO2CapSmall_02.png


SkimmerCO2CapSmall_03.png
SkimmerCO2CapSmall_04.png


just a cap that instead of CArbon, you put co2 scrubbing media... airline just compression fits into hole in lid of cap and goes to skimmer air intake...
Now most folks can find the space to do recirculating CO2 scrubbing.
@Gtinnel , interested?
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 65 37.1%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 59 33.7%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 25 14.3%
  • I have no plans to have feather dusters in my tank.

    Votes: 26 14.9%
  • Other.

    Votes: 0 0.0%
Back
Top