Setup on Raspberry Pi Zero WH

  • Thread starter Thread starter hurricain
  • Start date Start date
  • Tagged users Tagged users None

hurricain

New Member
View Badges
Joined
Dec 26, 2020
Messages
5
Reaction score
4
Location
Victoria
What state or country do you live in
Canada
Rating - 0%
0   0   0
My sensors are going up/down constantly. I bought a new Pi Zero WH to use. However when I start it up, and try to log in to the admin interface it gives me a 404. Seems like the webserver isn't working properly.

Anyone else experience this?
 
My sensors are going up/down constantly. I bought a new Pi Zero WH to use. However when I start it up, and try to log in to the admin interface it gives me a 404. Seems like the webserver isn't working properly.

Anyone else experience this?
Is the SSH connection working reliably through something like Putty ?

I’m assuming you are getting the 404 when you try to access the ReefPi Webpage with your Webbrowser.
 
My sensors are going up/down constantly. I bought a new Pi Zero WH to use. However when I start it up, and try to log in to the admin interface it gives me a 404. Seems like the webserver isn't working properly.

Anyone else experience this?
Hey hurricain, your old friend john here. You may need to give the device a good ol factory reset to back to the default settings, sometimes these babies don't exactly work right straight out of the box so it's best to start from scratch and work your way into it
hope this helps! ~Sharktooth John
 
Hey hurricain, your old friend john here. You may need to give the device a good ol factory reset to back to the default settings, sometimes these babies don't exactly work right straight out of the box so it's best to start from scratch and work your way into it
hope this helps! ~Sharktooth John
I installed this from scratch. New Pi Zero, new sd card, newly flashed .. I've been a software engineer for decades now. Maybe it's time to roll up my sleeves and contribute to this project :D
 
Is the SSH connection working reliably through something like Putty ?

I’m assuming you are getting the 404 when you try to access the ReefPi Webpage with your Webbrowser.
I've had this happen before.. have you tried a different browser or delete the browser cache history? If I remember correctly that fixed my issue.. but I am old and memory is failing :)..ya I can blame it on that.
 
My sensors are going up/down constantly. I bought a new Pi Zero WH to use. However when I start it up, and try to log in to the admin interface it gives me a 404. Seems like the webserver isn't working properly.

Anyone else experience this?
the startup and 404 is expected, what's happening is the usage metric is not present soon after startup, rest all domain objects are present. it should go away after first check interval. Its a benign issue.
 
My sensors are going up/down constantly. I bought a new Pi Zero WH to use. However when I start it up, and try to log in to the admin interface it gives me a 404. Seems like the webserver isn't working properly.

Anyone else experience this?
Are you saying your temperature sensor is dropping off intermittenty? If so this should be logged as error in the UI (config -> error). And is likely a hardware issue (unless the sensor is wifi /network based)
 

TOP 10 Trending Threads

WHAT’S YOUR MOST MEMORABLE EXPERIENCE WITH A CORAL THAT LOOKED LIKE IT MIGHT NOT MAKE IT?

  • I’ve seen a dramatic comeback. I would have sworn it was a goner

    Votes: 20 45.5%
  • A slow recovery, and it got back to looking healthy

    Votes: 7 15.9%
  • It came back some, but never looked as good as it used to

    Votes: 4 9.1%
  • I tried to save one, but it didn’t make it

    Votes: 7 15.9%
  • Mine is still struggling...no comeback yet

    Votes: 3 6.8%
  • I’ve never had a coral in serious trouble

    Votes: 0 0.0%
  • See, this is why I don’t keep corals

    Votes: 1 2.3%
  • Other (Post in the comments)

    Votes: 2 4.5%
Back
Top
Home
Post thread…
Market
What's new