Sfin's Dream.

[sfin52]

Returns, I went with 1" slip outside of the tank in order to use street 90's for a lower profile to the wall and 1" threaded inside the tank that immediately splits to two 1/2" loclines.

Overflow, both sides 1" slip so that I didn't have to worry about adjusting the bh if the threads didn't align in the direction the pipe was headed. Glued on the outside, press fit inside the overflow.

You got pics

 

[Lost in the Sauce]

You got pics

Of just the bulkheads?

Here is a side view installed. It looks like I had to step down with a reducing bushing from one inch to 3/4 on the inside before splitting into dual half inch.

 

[sfin52]

Of just the bulkheads?

Here is a side view installed. It looks like I had to step down with a reducing bushing from one inch to 3/4 on the inside before splitting into dual half inch.

Thank you. Mine come out the bottom I don't thing I'll need an elbow

 

[Lost in the Sauce]

Thank you. Mine come out the bottom I don't thing I'll need an elbow

Are you talking about buckhead's for the returns or drain lines?

 

[sfin52]

Are you talking about buckhead's for the returns or drain lines?

All thee above. I have corner over flows. The type of drains are candy canes (lack of proper terminology) the return use one set of holes in the corner over flows.

 

[Lost in the Sauce]

Sounds like you have a single durso in each corner. Now would be the time to convert those to Herbie and drill the back for your returns if you want to do so. You would use the return line hole in the overflow as your emergency drain.

 

[sfin52]

Sounds like you have a single durso in each corner. Now would be the time to convert those to Herbie and drill the back for your returns if you want to do so. You would use the return line hole in the overflow as your emergency drain.

Well the bean animal is out of the question. I only have two holes.
Your correct the dorso is what I have now.

The herbbie must be what your talking about

 

[Lost in the Sauce]

Well the bean animal is out of the question. I only have two holes.
Your correct the dorso is what I have now.

The herbbie must be what your talking about

Yeah that's what I said above.

"Now would be the time to convert those to Herbie, if you wanted to do so"

My 120 has a durso and it's loud and needs retuning often. I was very happy to move to an easier to tune system when I had the chance.

 

[F i s h y]

Sounds like you have a single durso in each corner. Now would be the time to convert those to Herbie and drill the back for your returns if you want to do so. You would use the return line hole in the overflow as your emergency drain.

Or just take returns over the back... ;) but def do the herbie's

 

[JoshH]

Or just one Herbie, 1" main siphon in one overflow and Secondary one inch in the other and use the 2 3/4" holes for returns ;Writing ;Bookworm

Or is it just the single overflow I forget ;Bored

 

[sfin52]

Or just one Herbie, 1" main siphon in one overflow and Secondary one inch in the other and use the 2 3/4" holes for returns ;Writing ;Bookworm

Or is it just the single overflow I forget ;Bored

Its double

 

[JoshH]

Its double

I thought so, that would be my suggestion is use the two 1" pipes for your herbie drain and the smaller ones as returns :cool:

 

[sfin52]

I thought so, that would be my suggestion is use the two 1" pipes for your herbie drain and the smaller ones as returns :cool:

They are all one inch

 

[JoshH]

They are all one inch

Interesting... usually they have one one inch and one 3/4" in each overflow

 

[sfin52]

Interesting... usually they have one one inch and one 3/4" in each overflow

This was an all custom tank. I think thats why things are the way they are.

 

[JoshH]

This was an all custom tank. I think thats why things are the way they are.

Sorry I must have totally missed the custom part, I just saw the dual overflows and thought it was a standard tank lol. Have you ordered the bulkheads yet?

 

[sfin52]

You guys i feel like a newbie and lost like an Easter egg on Christmas day

 

[Lost in the Sauce]

You guys i feel like a newbie and lost like an Easter egg on Christmas day

Make a list!

Get things on paper so you aren't thinking about everything at once. Tackle each thing and move on.

You got this homie.

 

[sfin52]

Make a list!

Get things on paper so you aren't thinking about everything at once. Tackle each thing and move on.

You got this homie.

Looking for what type of bulk heads to order

 

[Lost in the Sauce]

Looking for what type of bulk heads to order

You know your size. Do you need slip or threaded on the flange side, slip or threaded on the tail side?