Shallow reefs, let's see yours!!

  • Thread starter Thread starter Kyletc
  • Start date Start date
  • Tagged users Tagged users None
For those that are running t5 on a 12 inch height tank...how high up is your fixture? Mine is about 15 inch high off the rim of tank and I think it's not giving my sps enough light but I'm also afraid to fry or bleach them because it's such a shallow tank and the rockwork elevates some of them a tad lighter to the light...
 
Lagoon metal halide led combo zoa dominated

ImageUploadedByREEF2REEF1449133516.159340.jpg
ImageUploadedByREEF2REEF1449133566.184153.jpg
 
Currently setting up a 36x12x10...

image.jpg
image.jpg
Nice sump layout. Similar tank size to mine. How much water will end up in your sump? I used a 20 high in mind to increase water volume. In hindsight I should have gone with a normal 20 gallon. It's a pain to change the zeo rocks on my reactor. I run into clearance issues taking it out.
 
Nice sump layout. Similar tank size to mine. How much water will end up in your sump? I used a 20 high in mind to increase water volume. In hindsight I should have gone with a normal 20 gallon. It's a pain to change the zeo rocks on my reactor. I run into clearance issues taking it out.
Just using a regular 10 gal, so about 7 gal total while running. I'll only drop a couple gallons into sump when pump kicks off as drains & returns are pretty close to surface. I initially had 4 returns split in two by a SCWD, but have revised to only 2 with the SCWD on either end with a Jebao DCT6000. Mp10 on standby. Gonna use the middle sump chamber for different macros & maybe some light skimming if I need it. I like to run as natural as possible on the filtration side.
 
40x24x12 I recently built myself, roughly 3 months old. 6 bulb T5 fixture with ATI bulbs. 1.5in bulkhead with modified slip strainer making it DEAD silent with a Jebao WP-25 wave pump installed. Will be SPS dominated when I'm done filling her up.






 
Ya 12 is too shot for me unless it just a frag tank then it would be okay

Funny you mention that. It will be a frag tank once the new one is set up!

Not really shallow anymore though lol

9e12477d0e3ad0991b84992a4bfb27b8.jpg
 
For those that are running t5 on a 12 inch height tank...how high up is your fixture? Mine is about 15 inch high off the rim of tank and I think it's not giving my sps enough light but I'm also afraid to fry or bleach them because it's such a shallow tank and the rockwork elevates some of them a tad lighter to the light...

Agreed, mine is about 16" above and o need to lower mine a bit. Going to bring it down an inch every two weeks. Maybe hold at 12" for a while to see what results I get.
 
80g DB RR about 1 month old, LOVE the dimensions of this tank. It was an upgrade from a 40b.

1449500114944.jpg


1449500126305.jpg


1449500138056.jpg


1449500150256.jpg


1449500161238.jpg


1449500185074.jpg
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 46 56.1%
  • Automated dosing

    Votes: 6 7.3%
  • Mechanical filtration / roller filter

    Votes: 4 4.9%
  • Automated water testing

    Votes: 3 3.7%
  • Automatic feeding

    Votes: 1 1.2%
  • Lighting schedule

    Votes: 15 18.3%
  • Controller and remote monitoring

    Votes: 3 3.7%
  • Leak detection and emergency shutoff

    Votes: 1 1.2%
  • Automatic water changes

    Votes: 2 2.4%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.2%
Back
Top
Home
Post thread…
Market
What's new