Sharing RODI with family drinking

  • Thread starter Thread starter Bent17
  • Start date Start date
  • Tagged users Tagged users None

Bent17

Well-Known Member
View Badges
Joined
Mar 19, 2022
Messages
544
Reaction score
85
Location
Space
What state or country do you live in
Kentucky
Rating - 0%
0   0   0
Would having an RODI shared between filling up tank and family (bypassing DI) work or is it always best to have them seperate?
 
Making my day.. didnt want to have 2 seperate systems.. hoping there is a way to fill up the tank and still be able to have drinking water from the RO at the same time
 
hoping there is a way to fill up the tank and still be able to have drinking water from the RO at the same time
A Y connector before the DI resin. One side goes to your drinking water, one side to the resin and then off to your RODI storage.
You'll just have if/where you'll need valves on one/both of those lines. That would depend entirely on your set up.
 
Not my picture but I found this. Basically just use valves to determine where the water from the membrane goes.
1648658369420.jpeg
 
Not my picture but I found this. Basically just use valves to determine where the water from the membrane goes.
1648658369420.jpeg
Not my picture but I found this. Basically just use valves to determine where the water from the membrane goes.
1648658369420.jpeg
This is exactly how mine is setup. Works great except i use it manually to fil 5 gal jugs at a time. Its under my kitchen sink which isnt optimal for dual use when i need to do other things in the kitchen but it allowed me to make my own RODI for the cost of adding a DI filter(about $30).
ill probably eventually install a dedicated system in my garage so i can always have it making RODI into a storage tank.
 
I use the same system for both, but I put a valve in to bypass the DI part of the filtration for drinking water. Not only would that deplete the DI resin faster that I actually need for making reef water, but there are studies that have found that drinking RODI water is actually not healthy for you. So when I make drinking water I turn the valve and bypass the DI, when I make RODI water for the tank I turn the valve back. There are two different outputs, one for RODI and one for just RO... Good luck!
 
Perfect thank you all!
 
I just had a culligan tankless installed at my sink. The unit is in the garage a nd pumps out 5 gallons in about 6-7 minutes probably. I haven't timed it but its pretty fast. also use it for drinking, coffee etc. It has a booster pump on it and flushed the membrane every few hours on its own. pretty sweet.
 
I just had a culligan tankless installed at my sink. The unit is in the garage a nd pumps out 5 gallons in about 6-7 minutes probably. I haven't timed it but its pretty fast. also use it for drinking, coffee etc. It has a booster pump on it and flushed the membrane every few hours on its own. pretty sweet.
What did that run if you dont mind?
 

TOP 10 Trending Threads

HOW DO YOU COVER THE TOP OF YOUR REEF TANK?

  • Full mesh screen

    Votes: 9 52.9%
  • Glass or acrylic lid

    Votes: 3 17.6%
  • Partial screen or cover

    Votes: 0 0.0%
  • Canopy or fitted hood

    Votes: 1 5.9%
  • Open top

    Votes: 3 17.6%
  • A combination of these

    Votes: 1 5.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new