Shock from Tank

  • Thread starter Thread starter StevePhx
  • Start date Start date
  • Tagged users Tagged users None

StevePhx

Active Member
View Badges
Joined
Jun 19, 2017
Messages
197
Reaction score
279
Location
Arizona
Rating - 0%
0   0   0
Was doing maintenance on tank today and got a decent shock from my tank.

Turned off each piece of equipment one by one and it was still there.

Shut off return pump so isolated display from sump where all my equipment is. Still a shock in main tank and sump.

I have no electronics in display just 4 MP40s and lights over head.

I’m lost to where it is coming from. Can voltage travel into water through the glass or through a stand?

I’m at a total loss for where this is coming from.
 
Everything is unplugged in the sump too?

The residual water in the supply/return lines could be enough to transmit.
 
Last edited:
Unplug from the wall outlet.

Then (with extension cord if needed) plug back in each component one at a time to the single outlet/extension. Set heaters to max (but make note of current setting if you don't use a controller).
 
The only items not through energy bar are MP40s and Kessils.

I did double check the lights have no loose connections as well.


Hmmmm. Fair assumption and one that I too would make. Not all of my equipment runs through my energy bar though. You?
 
If I remember correctly don't some people ground their tank with a grounding probe to prevent stray voltage or getting shocked?
 
Electricity is not transmitted through glass. Glass is an insulator. This has to be coming from inside the tank.

The shock may not have been enough to discharge all of the voltage potential in the system. Best solution would be a ground probe to discharge the system, and troubleshoot from there using a GFCI shop cord or plug-in device. Your fingers aren't a terribly effective testing device lol
 
Fixed it but not exactly sure why.

I had this plugged into an outlet and had my power strip plugged into it.

I noticed the power strip said it was ungrounded so I removed the 6 way splitter and plugged power strip directly into the wall.

No more shock and power strip says it’s grounded.

Obviously I want to keep searching as I feel there is still a problem that is being covered up by power strip.

F25632E8-81A3-43B1-AC4F-ED2BDB7F94AA.jpeg
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 15.4%
  • Lighting, pumps, or other major equipment

    Votes: 4 15.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 7.7%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 7.7%
  • Corals! Must...Have...CORALS!!!

    Votes: 6 23.1%
  • Fish or other livestock

    Votes: 1 3.8%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.8%
  • I’m browsing, but don’t have a specific target

    Votes: 4 15.4%
  • I’m not shopping for reef deals this year

    Votes: 1 3.8%
  • Other (Post in the comments)

    Votes: 1 3.8%
Back
Top
Home
Post thread…
Market
What's new