Show me your 50 Lagoon APS Stand configurations!

[Maximus93101]

I am just getting my IM Nuvo 50 Lagoon AIO up and running, and need to see how some of you have your APS st ands configured.

So far, I have an ADJ PC-100A power strip sitting on the top shel, but need to see some ideas on mounting it to the tank stand.

Here is my current setup.

 

[blaxsun]

You could get a shelf bracket that hooks onto the aluminum shelf to mount the power bar.

 

[Maximus93101]

You could get a shelf bracket that hooks onto the aluminum shelf to mount the power bar.

Interesting... You wouldnt hapen to have a link to such a thing, would you?

 

[tnw50cal]

I got double sided sticky tape and a put them(2 power strips) on the right wall bottom back.

 

[blaxsun]

Interesting... You wouldnt hapen to have a link to such a thing, would you?

Not offhand, sorry. It's basically an S-shaped flat bracket. Or you could use command strips.

 

[TheWB]

I am just getting my IM Nuvo 50 Lagoon AIO up and running, and need to see how some of you have your APS st ands configured.

So far, I have an ADJ PC-100A power strip sitting on the top shel, but need to see some ideas on mounting it to the tank stand.

Here is my current setup.

There’s some pics of the inside of mine here.
https://www.reef2reef.com/threads/thewb’s-im-lagoon-50.543187/post-6056149
My stand was purchased before they started including the shelf. The shelf didn’t even exist at that point.
I bracketed in a piece of wood to the inside wall to use as a base to mount the Apex and my dj switch also hangs below the shelf from some L brackets. The pictures are old, it’s frightening how much junk I’ve got crammed in there now.

 

[Maximus93101]

There’s some pics of the inside of mine here.
https://www.reef2reef.com/threads/thewb’s-im-lagoon-50.543187/post-6056149
My stand was purchased before they started including the shelf. The shelf didn’t even exist at that point.
I bracketed in a piece of wood to the inside wall to use as a base to mount the Apex and my dj switch also hangs below the shelf from some L brackets. The pictures are old, it’s frightening how much junk I’ve got crammed in there now.

Oh, awesome! That was actually quite helpful. I dont know why I didn't think of this earlier, but i could hang the ADJ PC-100A from the bottom of my shelf quite easily, with a couple of 90 degree angle brackets.

 

[TheWB]

Oh, awesome! That was actually quite helpful. I dont know why I didn't think of this earlier, but i could hang the ADJ PC-100A from the bottom of my shelf quite easily, with a couple of 90 degree angle brackets.

Glad that helped.

 

[Bsnow0053]

I have the int overflow version with a sump, so way less space but I have my power strips with Velcro to hold them on the left side of the stand and the sump and ato res to the right of it, definitely way more cramped then yours would be. Just some ideas though

 

[Bsnow0053]