Siliconing starboard for barebottom tips

  • Thread starter Thread starter mfollen
  • Start date Start date
  • Tagged users Tagged users None

mfollen

Valuable Member
View Badges
Joined
Mar 14, 2013
Messages
2,369
Reaction score
1,870
Location
Chicago, IL
Rating - 0%
0   0   0
For those of you who have siliconed in starboard, abs or any other sheet to the bottom of your bare bottom tank, do you have any tips on how to best silicone the sheet to the tank?

I’d like to have a clean seal, with no open space around the edges for detritus to accumulate.

Did you apply a bead around the edge of the board? If so how far from the edge? Or did you apply a thin film over the bottom?

Thanks a bunch!!
 
One tip i found is to put a slight radius on your corners of starboard so they don't dig into your vertical seams of your glass silicone. I did that then just put some heavy beads down on bottom glass, put starboard down, put some weight on, let it dry overnight, then came back through and siliconed the top in using masking tape to get my edges straight.
 
Thanks @ChaseBurke when you came back for the top, did you run the tape on both sides of the silicone? one on the interior on top of the starboard, one above on the glass? Then wipe clean?

Thank you! Any other experiences and tips are welcome!!!
 
Yeah i did. Glass side and starboard side. Another tip, when you go to wipe excess off get your finger wet and to the seam in one pass so you don't have starts and stops.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 6.7%
  • I decorate AROUND the tank or stand

    Votes: 2 13.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 10 66.7%
  • We don’t decorate for the holidays

    Votes: 2 13.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new