Simple Nano Water Change

TheReefAbides

Active Member
View Badges
Joined
Apr 15, 2026
Messages
125
Reaction score
158
Location
USA
What state or country do you live in
Michigan
Rating - 0%
0   0   0
water change.jpeg


I'm writing this in hopes to help others that maybe looking for a simple and cheap Water change option for Nanos.
I currently have a 15g AIO. I do a 2 gal water change weekly or if I miss a week a 4 gallon W/c.

This is the simple and easy method I have used for consistent results.

Start with 2 gals in one container, weigh out and add salt. measuring in grams have produced consistent results. I also add my baking soda at this point to raise my ALK from 7 to about 9. Using a gram scale. I use an extra heater and mini pump in the container to bring to temp and let circulate for a couple hours.

The second container of the same type I use to siphon the tank water out with a mark on the side. Two gals out, then two gals in. after water is prepared the whole water change takes less than 15 mins.
 
Work smarter not harder. 🙂 My set up is similar but I use a rolling table to move the containers from one place to another. I am not a spring chicken any more.
What salt mix are you using?

Thanks for the helpful hints. Marking the containers at 2 gallons really helps. You're never over or under.

🙂
 
Work smarter not harder. 🙂 My set up is similar but I use a rolling table to move the containers from one place to another. I am not a spring chicken any more.
What salt mix are you using?

Thanks for the helpful hints. Marking the containers at 2 gallons really helps. You're never over or under.

🙂
I started with aquaforrest, but have since switched to Tropic Marin pro
 
water change.jpeg


I'm writing this in hopes to help others that maybe looking for a simple and cheap Water change option for Nanos.
I currently have a 15g AIO. I do a 2 gal water change weekly or if I miss a week a 4 gallon W/c.

This is the simple and easy method I have used for consistent results.

Start with 2 gals in one container, weigh out and add salt. measuring in grams have produced consistent results. I also add my baking soda at this point to raise my ALK from 7 to about 9. Using a gram scale. I use an extra heater and mini pump in the container to bring to temp and let circulate for a couple hours.

The second container of the same type I use to siphon the tank water out with a mark on the side. Two gals out, then two gals in. after water is prepared the whole water change takes less than 15 mins.
I need to do something like this! Thanks for sharing
 

TOP 10 Trending Threads

WHICH AREA OF REEFKEEPING MOST NEEDS A GENUINE BREAKTHROUGH?

  • Lighting

    Votes: 1 2.8%
  • Pumps and water flow

    Votes: 1 2.8%
  • Water testing and monitoring

    Votes: 12 33.3%
  • Controllers, apps, and device compatibility

    Votes: 5 13.9%
  • Filtration and nutrient export

    Votes: 1 2.8%
  • Automatic feeding

    Votes: 4 11.1%
  • Leak prevention and tank safety

    Votes: 5 13.9%
  • Equipment reliability and repairability

    Votes: 4 11.1%
  • Other (leave a comment in the thread)

    Votes: 3 8.3%
Back
Top
Home
Post thread…
Market
What's new