Single overflow 180 gallon....

[ReeferMadness01]

Just picked up a 180 gallon. The overflow only has one drain hole and one return hole. The bulkheads are 1.5” but the return is reduced down to 3/4... the drain was left at 1.5”. They used a piece of pipe and cut grooves in it all the way down... should I just use this or make something else?

 

[littlebeard]

Pictures are worth a thousand words. Can you show us what you're talking about?

 

[ReeferMadness01]

Pictures are worth a thousand words. Can you show us what you're talking about?

I’ll take pics when I get home!

 

[Blue Ring Octopus]

I have a single overflow on my 120-gallon tank, only one hole in the overflow, the return is through the bulk heads on the sides of the tank, I have to use a Maggi flow, they cannot handle a lot of flow, so you may be able to modify yours to use both holes for a overflow.

 

[ReeferMadness01]

I have a single overflow on my 120-gallon tank, only one hole in the overflow, the return is through the bulk heads on the sides of the tank, I have to use a Maggi flow, they cannot handle a lot of flow, so you may be able to modify yours to use both holes for a overflow.

I just don’t want to route the return over the side/back . I have no other bulkheads

 

[Rmckoy]

I only have 1 over flow ( 1.5” on the side of my 230

there is 2) 3/4” hoses from my return pump supplying water to the dt .

 

[ReeferMadness01]

I only have 1 over flow ( 1.5” on the side of my 230

there is 2) 3/4” hoses from my return pump supplying water to the dt .

How is the drain pipe made? (In the overflow)

 

[Blue Ring Octopus]

Sea Swirls are really nice, no need for bulk heads. I would get a DC pump for your return so you can match the return.

 

[monkeyCmonkeyDo]

You are wanting an overflow kit.
Usually comes with the overflow box. Bulkheads. Drill bit. And a template.
You might need to buy the box seperate. Just 3 beads of aquarium silicon and let dry.
D

 

[ReeferMadness01]

Sea Swirls are really nice, no need for bulk heads. I would get a DC pump for your return so you can match the return.

The setup came with a DC pump... guess I’ll have to look into Sea Swirls! Thanks

 

[Rmckoy]

How is the drain pipe made? (In the overflow)

 

[ReeferMadness01]

Yea mine comes out the bottom

 

[nereefpat]

I'd like to see pictures too.

My guess, without seeing pics, is that a good solution will be to turn those two holes into a Herbie and run a return or two over the back of the tank.

 

[ReeferMadness01]

I'd like to see pictures too.

My guess, without seeing pics, is that a good solution will be to turn those two holes into a Herbie and run a return or two over the back of the tank.

I had to leave town for work. Maybe later I can get the gf to take pics