Skimmer identification?

  • Thread starter Thread starter RJKain-777
  • Start date Start date
  • Tagged users Tagged users None

RJKain-777

Well-Known Member
View Badges
Joined
Aug 19, 2019
Messages
841
Reaction score
1,496
Location
Calgary
Rating - 0%
0   0   0
Was offered these skimmers, but have no info. Supposedly rated for 250 gallons each.

3BEF837E-B913-4D7C-8431-CE40E0E4B7EC.jpeg 7F390D75-393F-4377-A383-490F6A01C912.jpeg
 
Marine Technical Concept is the builder but are no longer around. They made a good product.
I think the web is still up on these.
 
Then I may use the cor 20 I have and use these pumps on a mixing/water change station lol
i ordered a Sicce SDC 9.0 for this.. 23' max head. up to 2500 GPH.. Also, pro tip from my friend. every so often, drip some RODI into the venturi air hose to clean out the salt build-up. he recommended something like 2 drips a second for an hour or something like that.
 
i ordered a Sicce SDC 9.0 for this.. 23' max head. up to 2500 GPH.. Also, pro tip from my friend. every so often, drip some RODI into the venturi air hose to clean out the salt build-up. he recommended something like 2 drips a second for an hour or something like that.
Thanks for the advice!
 
You know if you get sick of the snow you can come Palm Springs and bear gifts like one of those skimmer.
 
Seems like a mix of older/newer. MTC switched away from the blue acrylic about 15 years ago in favor of black. Newer MVX line used mazzei injectors rather than the older Beckett’s.

Quite a few old MTC skimmers in use because they essentially last forever .... well, unless you do something really stupid with them.
 
Seems like a mix of older/newer. MTC switched away from the blue acrylic about 15 years ago in favor of black. Newer MVX line used mazzei injectors rather than the older Beckett’s.
Thanks for the info. These will probably just go on the shelf with the rest of my collection of stuff I’ll never use.
The skimmer seems to be a tough decision for my tank, trying to figure out a different option then reef octopus, but not really working out. May need to just bite the bullet and buy one.
 
Thanks for the info. These will probably just go on the shelf with the rest of my collection of stuff I’ll never use.
The skimmer seems to be a tough decision for my tank, trying to figure out a different option then reef octopus, but not really working out. May need to just bite the bullet and buy one.
i hear these things along with the LifeReef ones are work horses. I suggest you try 1 out for a while to see how it works out before spending money on a new one. In parallel, you can be doing the research as to which skimmer would be the perfect one. I just looked at the pictures a little closer and noticed they are missing the venturis? Here is mine. I’m going to run it in the sump instead of external.
4225212C-EF48-47CB-891A-D2983A67285C.jpeg
 
Venturi are not missing. These older MTC skimmers used beckett injectors. They are on the floor in the second picture. They work quite well, but need a large, pressure rated pump to work at their best.
 

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 14 18.2%
  • Fish or coral food

    Votes: 4 5.2%
  • Test kits or reagents

    Votes: 8 10.4%
  • Filter media or replacement fleece

    Votes: 4 5.2%
  • RO/DI filters or supplies

    Votes: 13 16.9%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 8 10.4%
  • I keep a backup of everything

    Votes: 20 26.0%
  • Other (Post in the comments)

    Votes: 6 7.8%
Back
Top
Home
Post thread…
Market
What's new