Smart buddie booster pump flushing

[SuthernReefer]

So I have the smart buddie booster pump hooked up to my 100gpd RODI system. I leave it plugged in at all times and leave faucet on at all times. I have a float valve installed on reservoir.

My question is, once the float valve cuts the booster off, I go back and turn the flow valve off on my RODI ( not to be confused ruth faucet, which stays on ) just as an extra precaution. Is this preventing my automatic flush valve from flushing daily? Ive never considered this until today

 

[lapin]

Most systems like the BRS ones flush at the begining

75 GPD Auto Flush Flow Kit​

…AquatecAuto Flush Flow Restrictor Kits include everything you need to incorporate automated membrane flushing on almost any RODI system. The system will be flushed when the unit turns on for a few seconds, and then for 15 to 20 seconds per every hour of use. Two Kits Available: 75 GPD Auto Flush…

 

[SuthernReefer]

The AquaticLife booster pump does too. Everytime you turn it on and every 24 hours, but I don't think it will the way I'm using it because I'm cutting flow off at the unit.

@AquaticLifeProducts can you confirm this?

 

[CosmicMan]

The AquaticLife booster pump does too. Everytime you turn it on and every 24 hours, but I don't think it will the way I'm using it because I'm cutting flow off at the unit.

@AquaticLifeProducts can you confirm this?

Im having the same problem. I cant let it run all the time and like to manually shut it off when I am not making water. Trying to figure out how to setup a manual flush with this unit.

 

[Allenh427]

I just unplug it and plug it back it in. I have one of those 3 way T valves now so I don't flip the T valve to my di resin until I let the water run for about 5 minutes down into the drain.