"How much" in order to achieve what goal?
The link says that the product is 28% by weight of silica (SiO2). It also says that it has a "specific gravity" of "1.39 g/cm3" (which sounds more like a density than a specific gravity to me, since specific gravity is a ratio, and therefore, unitless). Treating the "1.39" as a density, and using the percentage of silica stated on the label, then 1 ml of this solution will provide 0.28 * 1.39 = 0.389 grams, or 389 mg, of silica (SiO2). If added to 100 gallons of tank water, that 1 mL of solution would give a concentration of 389 / (100 * 3.785) = 1.03 mg/L = 1.03 PPM (w/v). To convert that to silicon, then multiply by the atomic weight of silicon (Si) divided by the molecular weight of silica (SiO2) = 1.03 * 28.085 / 60.08 = 0.481 PPM Si. In your case of a 28 gallon tank, then it would be 0.481 / 0.28 = 1.72 PPM, if you add 1 mL of this solution to your 28 gallons of water.
How much to dose depends upon how much you want to add.
EDIT: This stuff is quite concentrated. Be careful with it.