Sps issues

  • Thread starter Thread starter kwmcdani
  • Start date Start date
  • Tagged users Tagged users None
You should get phosphates up higher. I recommend turning off the refugium and running a cryptic sump for now.

I would also crank up those lights significantly. With those lights I would run all channels at 100% or near that level for half the day then reduce whites / go heavy blues for second half of the day.
 
So here is an update on where I am at, Lighting changes got the ATI back today.

Still struggling with SPS but only been running the G6's for about a week.

ParameterATI resultAssessment
Salinity29.91 PSUCritically low
Alkalinity7.87 dKHAcceptable
Calcium441 ppmHigh relative to measured salinity
Magnesium1,160 ppmLow for a 35 PSU reef
Potassium298.5 ppmLow
Iodine1.35 µg/LCritically low
Molybdenum1.41 µg/LCritically low
Strontium10.11 ppmElevated
Nitrate11.58 ppmReasonable for a mixed reef
Phosphate0.06 ppmWithin our target

IMG_2888.jpeg

Equipment / SettingCurrent status
Main lights2 × EcoTech Radion XR15 G6 Pro
SpectrumAB+ preset
Intensity50%
Previous intensity75%
Previous lights2 × Red Sea ReefLED 90, removed
Supplemental lightingOrphek OR4 UV/Violet ordered; installation not confirmed
 

Attachments

So you have changed two 90W lights for two 105W lights. That is not going to make any significant difference.

The AB+ schedule dims down whites. You don’t have the extra power providing the wiggle room to do that.
 
Most important issue is find a reliable way to measure salinity. Least brain damaging is Tropic Marine Hydrometer or reliable refractometer like the VeeGee STX-3

For lighting, if you want to focus on SPS you need more lights. I have the same rank (ie, RedSea 525) and am SPS dominant. When I was considering Radions I was planning to go with three XR30 or six XR15. I was also going to supplement with two of the five ft AI Blades. With your current setup it is okay with mixed reef. Even then I would run the lights for at least half the day all channels at 100%.
 
Last edited:
I am old skool, i am not replying to dicate/disagree with any fellow reefers.
My reply is from my experience.
Maintain simple sea water parameter's

35ppt
Mag 1280+
Ca 400/410
Alk 7/8

Quite a post, srry, i bypassed most of it!

Maintain ph above 8! , Regular water changes will supplement what you don't manually dose, I'm not referring mag/ca/alk,. You are only keeping water.. It is Simple!
 
So you have changed two 90W lights for two 105W lights. That is not going to make any significant difference.

The AB+ schedule dims down whites. You don’t have the extra power providing the wiggle room to do that.
Thanks for the input yes I already had one G6 and added another for the better spectrum. Ill do so me research on the best setting for these lights. Also not I added orphek Led bar for SPS.
 
What should I realistically be look for par at peak lighting for a few hours? That would really help me.
A safe range is 250-350 par halfway down the tank. May be able to get away with 200 but you should not go lower. Some people run much higher par (ie, 400+).
 
ok I updated my schedule to run the G6's for 4 hours at 100% with the following settings, the Orphek led bar is still running at 70% at peak. You can see my below updated par map.

1794870665284.png


1794870734723.png
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 8.3%
  • I decorate AROUND the tank or stand

    Votes: 1 8.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 9 75.0%
  • We don’t decorate for the holidays

    Votes: 1 8.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new