stand builder experts

[cope413]

it was a duplicate post... hit it twice...

 

[danangelo]

it was a duplicate post... hit it twice...

Oh ok thank you again for your help it made alot of sense with your drawings. .will post when done..

 

[Sahin]

Many thanks for pointing me to this thread. Very very useful. And some VERY helpful reefers here too. :)

 

[danangelo]

Many thanks for pointing me to this thread. Very very useful. And some VERY helpful reefers here too. :)

No problem my friend..yes sir I always get great help from here..

 

[danangelo]

it was a duplicate post... hit it twice...

Oh ok...
I have an Issue adding the other support on the left it will block the overflow I see why they didnt put one is that gonna be an issue?

 

[cope413]

can you post a picture?

 

[danangelo]

can you post a picture?

here you go thanks.

 

[cope413]

Ok, so the plumbing is in the way.

That's fine.

You could brace both sides

Or you could just brace 1 side.

it looks like 1/2" ply for your top, so you've got plenty of strength. From what I can see, I would just the side nearest that loop that presumably holds some of your lines up.

 

[danangelo]

Ok I was thinking of doing that..Where do I screw them in for the new braces sorry for so much questions

 

[cope413]

I would recommend pocket holes. Very easy and very strong.

A Kreg jig is inexpensive - and very useful

 

[danangelo]

I am not to familiar with that can I make that pocket hole with a drill?

 

[cope413]

you can, but it's a little tricky.

if you don't want to get a jig, I would watch some youtube videos on how to do it.

 

[danangelo]

Ok I will do that thanks a lot. .That brace on the left corner should I screw it in from the top?

 

[cope413]

No, you'll want to screw it in from the support on all the pieces.

 

[danangelo]

No, you'll want to screw it in from the support on all the pieces.

Oh ok thanks again

 

[danangelo]

Heres the final framing need to seal primer and paint and add the panels..

 

[cope413]

Looks good. Are you happy with how it turned out?

 

[danangelo]

Looks good. Are you happy with how it turned out?

Ya thank you its solid...we even added 2x4 frame on the bottom..

 

[cope413]

Great. Now you've got a study rebuilt stand and a new skill in the repertoire.

Post pics when it's all finished and back up and running.