hey and thanks for reading. But so far it’s planned 2 panes maybe a trap at the end but 1 off the sock 11 inches long. then fuge 12. inches long then return side 6 inches the return side is my curiosity as I don’t wanna ever let it run dry. It’s a 580 GPH and know the flow frevenfs that bit I like room as the max full of the panes like 8 inches that’s like 1/10 of a gallon... not a lot but could. But really want a 12 inch fuge but can shorten it for the return. Also the sock side will b set at 1 level from that 1st pane so skimmer height won’t fluctuate as I was going 2 make a 3 chamber witha 3 inch sock but saw it as a waste from company’s not doing it to. So here’s my pics. There’s tape on the glass but the rick and morty box is the 1st and the dew is the 2nd. Thanks.
Sump baffle lengths.
- Thread starter Sir Chris
- Start date
- Tagged users None
Luno
Well-Known Member
Not being rude but is English your second language? It's a little difficult to understand what you are getting at. Are you asking a question after all of the information. Are you asking if your return is going to be big enough?
OP
OP
Sir Chris
Valuable Member
- Joined
- Apr 30, 2016
- Messages
- 1,139
- Reaction score
- 385
Sorry. Yes the . Should be ? On 1/2 the sentences at the end. It’s basically is a 6 inch return chamber large enough or 8 inch? And I go in vacations and if the person is lazy I don’t want issues. And that little quantity can help. And ive cut the glass 2nite and I’m thinking 3rd pain I can slide my marine pure.
Similar threads
