Sump Modification for Clarisea

[NuvoReefer30]

Alright guys so i bought a new sump for my system, a Fiji Cube 24. So i have the Clarisea 3000 and im trying to figure out how to plumb it in. Kinda did some rough editing on the iPhone but what are your thoughts? I think ill definitely drill two bulkheads; one higher than the other (one for Clarisea and one for emergency drain.) But should i put a 90 on the down pipe and directly plumb it into the bulkhead i would be drilling? Or can i get away with letting that back compartment fill up and let it just drain into the bulkhead, which is plumbed into my Clarisea. Sorry for novel but any ideas?

 

[blaxsun]

I would probably put 90 bends on both pipes and direct them into the next chamber - leaving the first one dry. Before you drill make sure you have the right height for the Clarisea figured out.

 

[NuvoReefer30]

I would probably put 90 bends on both pipes and direct them into the next chamber - leaving the first one dry. Before you drill make sure you have the right height for the Clarisea

okay because that had also crossed my mind, thanks alot!

 

[Whoookid201]

Any updates on the project? I've been researching this combination for a future build. Does the clarisea fit well in that chamber?

 

[jordangdoee]

Update ? Also looking into this