Sump or wet/dry filter

Hooked on Corals

Community Member
View Badges
Joined
Apr 25, 2026
Messages
34
Reaction score
21
Location
Victorville
What state or country do you live in
California
Rating - 0%
0   0   0
Hello, so I recently bought a freshwater 250 gallon setup used from someone and it came with a sump. But it was really dirty and have like media balls and stuff in it. I think it is a eshoops wet/dry system. I had to re-silicone it and realize it didn’t look the way a sump looked with the baffling. Can I use this for my reef tank? Or can I somehow turn it into a sump “ DIY”. I’m pretty good at that.lol or what do I do? I attached one pic of before and two after I fix/cleaned it. Any and all advice will help.

IMG_0786.jpeg IMG_1209.jpeg IMG_1211.jpeg IMG_1221.jpeg
 
This could definitely be converted, assuming it’s well built, and actually designed to hold water up to the rim!

I’ve seen a few brands of trickle filter which have an indicated max water line around 1/4 of the way up, which can definitely split open if overfilled!
 
This could definitely be converted, assuming it’s well built, and actually designed to hold water up to the rim!

I’ve seen a few brands of trickle filter which have an indicated max water line around 1/4 of the way up, which can definitely split open if overfilled!
Oh yes it has a water line about 1/4th of the way as well
 
Oh yes it has a water line about 1/4th of the way as well
Oof, I’d be cautious about using this as your sump, then!

I’ve seen some remarkably shoddy build quality on several examples, and have personally blown one out at a welded joint during a fully filled pressure test just to see what would happen…

What you could do is break it down for acrylic sheet to use as baffles for an off-the-shelf glass tank, making your own sump!
 
Oof, I’d be cautious about using this as your sump, then!

I’ve seen some remarkably shoddy build quality on several examples, and have personally blown one out at a welded joint during a fully filled pressure test just to see what would happen…

What you could do is break it down for acrylic sheet to use as baffles for an off-the-shelf glass tank, making your own sump!
That’s true! I wish I he knew that before I resealed everything
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 12 18.2%
  • Powerheads or wavemakers

    Votes: 5 7.6%
  • Sump or rear filtration chambers

    Votes: 9 13.6%
  • Skimmer or other filtration equipment

    Votes: 9 13.6%
  • Overflow or plumbing

    Votes: 12 18.2%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 18 27.3%
  • Other—tell us what I missed

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new