- Joined
- Feb 24, 2020
- Messages
- 21
- Reaction score
- 30
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sorry guys, by mistake I send the wrong drawing over the phone. Please take a look at this one instead.
lol dobre, serdeczne dzięki .Wyglada w porzasiu
That sounds kinda crazy to use up to 5 pumps. I wonder how he does that. My tought wad rather using 2 separe pumps, each running independently via its own pipe. The olny conern I had, was the first wall right after the drop section. I am not sure if the water preasure wont blow off the meadia located on the small shelf between the drop section and the skimmer.It looks OK to me. I had a friend who had a big system and used 4 or 5 medium sized pumps rather than one big one. That way if one failed, it didn't take down the entire system.
Hi, Thanks for your reply. Can you take a look again on the drawing? I made some changes and I would love to have this layout. Do you think this will work out just fine?the ATO float is in the return, right?
He used one as a return to the DT, one as a feed to the skimmer, one to the GFO & carbon reactors, one to a separate refugium...That sounds kinda crazy to use up to 5 pumps. I wonder how he does that. My tought wad rather using 2 separe pumps, each running independently via its own pipe. The olny conern I had, was the first wall right after the drop section. I am not sure if the water preasure wont blow off the meadia located on the small shelf between the drop section and the skimmer.
Drawing looks ok to me. Drain, skimmer, refugium, return is exactly how my sump is laid out, and I like it.Final drawing