Supporting horizontal manifold and valves

[Be102]

I currently attached my manifold to my return pump however it is not supported by anything other than a temporary pvc pipe. It’s a little far to reach to the back of the stand to actually reach with screws or something so I’m thinking maybe zip ties...? Any other ideas?

 

[zachxlutz]

Plastic hanger straps from your local hardware store should work out great for you.

https://www.homedepot.com/p/Oatey-3-4-in-x-100-ft-Plastic-Hanger-Strap-33528/301505502

 

[Be102]

Plastic hanger straps from your local hardware store should work out great for you.

https://www.homedepot.com/p/Oatey-3-4-in-x-100-ft-Plastic-Hanger-Strap-33528/301505502

Cool, how would I attach them? Just do a loop then go attach to the same piece of the wood above? Dont really have much place to attach below it.

 

[zachxlutz]

Cool, how would I attach them? Just do a loop then go attach to the same piece of the wood above? Dont really have much place to attach below it.

That's how I've used it in the past. It acts as a hanger. Cut to length as needed.

 

[BigHildy53]

Can also use a metal pipe hanger.
https://www.lowes.com/pd/Cambridge-Resources-2-in-Dia-Galvanized-Hanger-Iron/3736687