Swapping out dissolving MarinePure?

  • Thread starter Thread starter Simply__J
  • Start date Start date
  • Tagged users Tagged users None

Simply__J

@MoriReef45
View Badges
Joined
Mar 24, 2014
Messages
322
Reaction score
219
Location
Miami
Rating - 0%
0   0   0
Looking for ideas on how to swap out my dissolving MarinePure spheres, blocks, and rubble.

Purchased some Nano-Tech Bio-Spheres to replace the marinepure which pretty much crumbles to the touch. I have a very loose idea of how to go about it but was hoping to get some tips and advice from any member who has done this before or knows how to. Thanks.
 
maybe use a strainer or something similar?
I have a marine pure block I’ve used for about 3 years now and it’s in perfect shape..
how long have you had yours?
 
Looking for ideas on how to swap out my dissolving MarinePure spheres, blocks, and rubble.

Purchased some Nano-Tech Bio-Spheres to replace the marinepure which pretty much crumbles to the touch. I have a very loose idea of how to go about it but was hoping to get some tips and advice from any member who has done this before or knows how to. Thanks.

The big issue is doing this without crashing the tank. I’d personally put the
spheres in for 4 weeks minimum before removing the block. In the meantime, consider getting a mesh bag and slowly covering the block with it, then give it a quick flip.
 
Finally got around to swapping the marinepure for the bio-spheres. I placed all the old marinepure in one big mesh bag and kept it in the sump. Trying to contain as much of the dust/particles in one place. I've been adding a few of the new bio-spheres weekly in separate smaller mesh bags. As I add them I remove a little bit of the old stuff that's disintegrating as you can see below.
20200227_215503.jpg
20200227_215535.jpg
20200227_215552.jpg
 
^^^^^ Yeah that is not good, I have noticed that one of mine did that too, do you have a link to what you will change to?
 
^^^^^ Yeah that is not good, I have noticed that one of mine did that too, do you have a link to what you will change to?
Amazon product ASIN B07BFHP5SW
Switching the marinepure stuff out for the above. Although the spheres were in bad shape I found the bricks to be in the worse condition. So I've kept the deteriating spheres in a mesh back until the transition is over as to not shock the system.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 19.1%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 8 9.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.2%
  • I keep a backup of everything

    Votes: 23 25.8%
  • Other (Post in the comments)

    Votes: 7 7.9%
Back
Top
Home
Post thread…
Market
What's new