OP
OP
syedjilani
Active Member
another one.
SYED's 200G Rimless Reef
- Large Build
- Thread starter syedjilani
- Start date
- Tagged users None
another one.
OP
OP
syedjilani
Active Member
filled up overflow box with tab normal water. Alhamdulillah no leakage in overflow box....
Small dripping found in drain plumbing.... which I already fixed.
OP
OP
syedjilani
Active Member
So here it goes......
I have done little work on AC cabinet with lighting hanger....
The gray 4cm cube is the base of AC cabinet, which will cover with wooden frame.
OP
OP
syedjilani
Active Member
AC cabinet 4cm cube bar... with black paint.
OP
OP
syedjilani
Active Member
This is 8cm x 5cm iron bar, which will hold lighting.
OP
OP
syedjilani
Active Member
AC cabinet.
All panels are black painted.
All panels are black painted.
OP
OP
syedjilani
Active Member
Front, right, left and top panels of AC cabinet.
OP
OP
syedjilani
Active Member
So here is the whole story reaching END......
Full view of complete product..... this is for your information that each and every thing which is visible in this picture is done with my own hands...
OP
OP
syedjilani
Active Member
another one.
OP
OP
syedjilani
Active Member
Another one.
OP
OP
syedjilani
Active Member
Another View
OP
OP
syedjilani
Active Member
Another one.... so this is the latest until today.......
Let see tomorrow morning what else I will able to finish..
OP
OP
syedjilani
Active Member
So here it goes....
Lighting fixture is ready to hang..
OP
OP
syedjilani
Active Member
The stuff I used to hanging lighting...
OP
OP
syedjilani
Active Member
Lighting fixture is ready....
It holding
2 x 400Watts Radium 20K MH.
2 x 60Watts T8 Cool day lights
2 x 60Watts Fuji purple
6 x 8watts T5 Actanic Blue
OP
OP
syedjilani
Active Member
I collected NSW for it...... see the salinity..... it 40sg.
I need to add good quantity of RO water..... I think it will be more than 200 liters...
OP
OP
syedjilani
Active Member
Collected Four buckets Natural Live Sand from Sea..... it was pathetic to lift 40-50 KG of each bucket and walk in the sea....
I collected two different grain size sand......
Fine grain and white sand for DT, as it will give more bright look and will help for more reflection at the bottom of the tank...
See what I got.
A bucket of White fine sand..
OP
OP
syedjilani
Active Member
Thicker grain for Sump..... because of less water flow in the chamber where DSB located I chose thick grain sand to let it oxygenate easily. Fine sand will cause to built up Sulphur problem.
OP
OP
syedjilani
Active Member
This guy came in my way...so I took a change and got it....
The Red Sea or two-banded clownfish / anemonefish (Amphiprion bicinctus).
OP
OP
syedjilani
Active Member
So here we go...
Time to update....
I added sand in the sump "refugium" and DT. Fine sand in DT and thicker grain in the sump.
You can see the upper layer, which is light in color is fine sand and bottom layer which is thicker sand. This is refegium picture.
Similar threads
