System 2 tank close to overflowing- Why?

Damion Clark

New Member
View Badges
Joined
Apr 10, 2018
Messages
7
Reaction score
2
What state or country do you live in
Hawaii
Rating - 0%
0   0   0
Guys, I could use your help. I have 2 system 2 salt water tanks. One of them has nearly an inch to the top and can accommodate several gallons in the return reservoir before completely submerging the bioballs. My other tank will only hold several cups of water in the tank return before the water level overflows the rim of the tank. This makes it very challenging to keep enough water in the tank before it starts evaporating and the pump starts sucking air. I am woken up every week by the t
20180930_085929.jpg
ank reaching the return pump's minimum water level before it starts sucking air and blowing bubbles. I'm totally at a loss as to why this tank is doing this. See pics. Your help is most appreciated.

20180930_085957.jpg


20180930_085937.jpg


20180930_090053.jpg


20180930_090119.jpg
 
Looks to me like something is blocking the flow in the overflow. If you have bioballs in there I’d suggest removing them and see if the problem stops.
 
Pull your pump and clean it, especially the intakes and Impeller area. The pump cannot keep up with the incoming water due to poor delivery. Looks like a lot of slime in the sump area of tank. Take a Clean rag and wipe the slime off the surfaces especially in the one where the pump is housed.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new