- Joined
- Jan 30, 2023
- Messages
- 651
- Reaction score
- 467
- Location
- Alaska
- What state or country do you live in
- Alaska
Hey people. I currently have a standard 120 with a 40 gal sump. The stand is 30 inches tall and the tank 24. I have an old Eheim 1262 as a return pump (plus I have a back up should it ever fail).
I'll be revising my setup and replacing the 40gal sump with a 60 breeder to have more room for frags. Because I can't fit it under the main tank due to the stand design the 60 will be projecting out from the right side of the main tank forward (like an "L"). I'll butt it right up to the original tank and stand so the overflow will just drop right into it (previously I had a 45 elbow to route it into the 40gal). I'll raise it up on a stand since since I am no longer confined to the space under the tank. That will make it easier to work on, see the frags and grow out colony's, and give me some extra storage.
Raising the sump this will lower my head pressure/load of pushing up the water by at least 20 inches, maybe 30. Currently the return line come up from the sump (essentially on the floor relative to the tank), curves over the tank (rigid PVC) runs the full 4 feet, then 90's into Y with LocLine. The flow is pretty strong already, I wouldn't want it any stronger.
So, I see my options as being install a valve (wastes electric and puts more pressure on the pump), create some sort of manifold with more output areas to disperse the flow, or buy a DC pump when I can regulate the flow rate.
Sales are good now, but pumps aren't cheap anyway (plus I don't even know how to size a replacement). I like the idea of a DC pump, but not the extra cost nor not having a backup on hand. Looking for thoughts, suggestions or recommendations.
Also, previously (10+ years ago) I used some semi rigid PVC tubing with ribs (sort of corrugated). I don't even think Lowes has that any more. Using it allowed more curves so less elbows. What are people using today, just straight up PVC pipe?
I'll be revising my setup and replacing the 40gal sump with a 60 breeder to have more room for frags. Because I can't fit it under the main tank due to the stand design the 60 will be projecting out from the right side of the main tank forward (like an "L"). I'll butt it right up to the original tank and stand so the overflow will just drop right into it (previously I had a 45 elbow to route it into the 40gal). I'll raise it up on a stand since since I am no longer confined to the space under the tank. That will make it easier to work on, see the frags and grow out colony's, and give me some extra storage.
Raising the sump this will lower my head pressure/load of pushing up the water by at least 20 inches, maybe 30. Currently the return line come up from the sump (essentially on the floor relative to the tank), curves over the tank (rigid PVC) runs the full 4 feet, then 90's into Y with LocLine. The flow is pretty strong already, I wouldn't want it any stronger.
So, I see my options as being install a valve (wastes electric and puts more pressure on the pump), create some sort of manifold with more output areas to disperse the flow, or buy a DC pump when I can regulate the flow rate.
Sales are good now, but pumps aren't cheap anyway (plus I don't even know how to size a replacement). I like the idea of a DC pump, but not the extra cost nor not having a backup on hand. Looking for thoughts, suggestions or recommendations.
Also, previously (10+ years ago) I used some semi rigid PVC tubing with ribs (sort of corrugated). I don't even think Lowes has that any more. Using it allowed more curves so less elbows. What are people using today, just straight up PVC pipe?
