Tank Help

LEOreefer

Valuable Member
View Badges
Joined
Feb 14, 2012
Messages
1,067
Reaction score
691
Location
Virginia
Rating - 0%
0   0   0
Hello All,
Ive been having some issues with my tank, through ICP testing and regular testing I ruled out all obvious issues. Literally the only thing I havnt done was change out my RODO filters and membrane. I have a 6 stage RODI filter system 150 GPD from BRS. My TDS meter reads 0 and ill post the ICP test from my RO water below. My question is, is it possible my RODO water is bad even though TDS meter and ICP says its ok? The RO membrane is over 2 years old. Im at a loss as to whats going on with my system.

Screen Shot 2020-02-20 at 7.21.32 PM.png Screen Shot 2020-02-20 at 7.21.44 PM.png Screen Shot 2020-02-20 at 7.22.11 PM.png
 

Elitecorals

Active Member
View Badges
Joined
Jul 28, 2017
Messages
190
Reaction score
69
Rating - 0%
0   0   0
What's your issue with the tank? Corals not dosing well? If your DTS said 0 then your rodi water is good. It could be nutrients, water parameters, light and flow.
 
OP
OP
LEOreefer

LEOreefer

Valuable Member
View Badges
Joined
Feb 14, 2012
Messages
1,067
Reaction score
691
Location
Virginia
Rating - 0%
0   0   0
What's your issue with the tank? Corals not dosing well? If your DTS said 0 then your rodi water is good. It could be nutrients, water parameters, light and flow.
Corals are closed and not healthy. My nutrients are in check and ICP of tank water does not show any real flags. I’ve had many successful tanks in the past so this is new to me. I will be changing out all filters and membranes. That’s why I asked if RODI water can be bad even though it’s reading 0 tds
 

Creating a strong bulwark: Did you consider floor support for your reef tank?

  • I put a major focus on floor support.

    Votes: 34 43.6%
  • I put minimal focus on floor support.

    Votes: 19 24.4%
  • I put no focus on floor support.

    Votes: 23 29.5%
  • Other.

    Votes: 2 2.6%
Back
Top