Tank leaking!

  • Thread starter Thread starter atp0726
  • Start date Start date
  • Tagged users Tagged users None

atp0726

Active Member
View Badges
Joined
Jan 31, 2012
Messages
281
Reaction score
62
Location
Upstate, NY
What state or country do you live in
New York
Rating - 0%
0   0   0
tank sprung a pin hole leak at the bottom corner while I am away for business. At 11pm over the phone we were able to get it mostly plugged with a tooth pick and coral glue.
Any suggestions for a better fix until I can get livestock moved?
BBFA1739-F2C8-42E9-8770-7D1749CB0981.jpeg
 
tank sprung a pin hole leak at the bottom corner while I am away for business. At 11pm over the phone we were able to get it mostly plugged with a tooth pick and coral glue.
Any suggestions for a better fix until I can get livestock moved?
BBFA1739-F2C8-42E9-8770-7D1749CB0981.jpeg

Coral glue INSIDE the tank, maybe? Just scoop some of that substrate away, glob coral glue into the corner.
 
Flex tape was my thought as well only don’t have any available.
 
Hmmm this is interesting. Do you plan on getting a new tank or just trying to fix it? If you try to fix it, it might leak again sooner or later...
 
I had something similar happen to me, glass seam on side, get a new tank as soon as possible, because the pressure of the water in the tank will only make leak larger eventually. I would plan for an emergency evacuation of the coral and fish, a tub that's not being used or large brute garbage can may serve as temporary home, just make sure you clean them and you have a way to maintain temp and waterflow. If you have a LFS you may ask them to hold some of your fish and/or coral. I tried the superglue on the inside and it was a mess, did not work. I have since replaced my tank and I have an emergency response plan in place. I lost a lot and because I was not prepared and I panicked when it happened. You at least have it stopped for now but don't delay.:oops:
 
Flex tape inside, the pressure pushes against the tape towards the leak, outside you are fighting water pressure. Anywhere it makes a nasty mess if you try to reseal later.

The other material you may have in hand is the stick epoxy putty used for frags and rock work construction. Again, mash the 2 parts together and stick a wad inside the tank to mechanical plug or slow down the seep.
 
If you have the stick of epoxy that people use for holding rock work. It will work it is actually a thing called Aquamend and its ment to fix leaking pipes. It will work we use a cracked aquarium at work to test it. Wipe the sides of the crack with alchohol to get the oils away if any. And slap a glob on.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new