Tank leaking

  • Thread starter Thread starter Jvesche20
  • Start date Start date
  • Tagged users Tagged users None
You think that could be the issue?
it could.... everything on this earth bend's over pressure... you have a wood stand... and right in the middle you have no reinforcement just right where the most of the pressure is... and if you chipped it the glass near the seal it could be.. do a pic
 
you think it's in the middle of the tank somewhere?
where he has no reinforcement ? there it could be also...
F53093BA-405A-4461-9083-126F6AF93458.jpeg
I found this near where it was leaking. It was coming out of 2 spots of the trim but this is the only spot I can really find
 
it could.... everything on this earth bend's over pressure... you have a wood stand... and right in the middle you have no reinforcement just right where the most of the pressure is... and if you chipped it the glass near the seal it could be.. do a pic

Are you sure this is true? The tank is rimmed so all the pressure is exerted on the four corners.
 
you think it's in the middle of the tank somewhere?
where he has no reinforcement ? there it could be also...
Appears from the photo that the end brace really has no vertical support to it. That is where it looks like it is leaking? Where the bucket is?
 
Maybe hire someone that can take the tank apart and reseal it correctly. I wouldn't sleep well knowing it leaks like this.

This sucks.
 
3557FEF5-CDDD-4EE0-B957-881AA140E3E1.jpeg

this is how high I have the water and it seems to be fine. I haven’t added any rocks or sand yet. Just have the fish and my coral from my other tank
That’s your problem. The wooden stand has bowed in the middle as there isn’t any support. You’ll find the rear bottom of the tank has come apart. This happened to me when I did the same thing well over 20 years ago. I got a new tank and had a steel stand fabricated with 8 legs - every 24”. Nightmare. I would never put a 150g tank on a wooden stand again ever.
 
Are you sure this is true? The tank is rimmed so all the pressure is exerted on the four corners.
dosen't matter... it bends.... even it bends for 2-3 mm... and if the silicone wont hold... it wil
Correct. Only when it’s 100% filled. Which doesn’t make sense to me
more water more pressure
 
F53093BA-405A-4461-9083-126F6AF93458.jpeg
I found this near where it was leaking. It was coming out of 2 spots of the trim but this is the only spot I can really find
there u have the leak.. it was not properly sealed and has burst due to the pressure
 
Appears from the photo that the end brace really has no vertical support to it. That is where it looks like it is leaking? Where the bucket is?
Where the bucket is where the water is coming out. The trim is cracked in that spot so that’s why it leaks from there. It’s leaking somewhere in the back of the tank can’t find where
 
Still silver lining at least it wasn’t populated mine went fully stocked. Was a mad rush to grab everything out and chuck it into the sump. Called a local aquatics store and gave them the lot. Lots serious $. I just didn’t want the stock to die.
 
dosen't matter... it bends.... even it bends for 2-3 mm... and if the silicone wont hold... it wil

more water more pressure

I have seen a 180 gallon tank fully supported with 4 cinder blocks on each corner. There was nothing else, just 4 blocks on each corner.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 18 29.5%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.3%
  • I’d rather get a gift card and pick it myself

    Votes: 23 37.7%
  • I’d prefer gear or supplies instead

    Votes: 1 1.6%
  • Please don’t surprise me with livestock

    Votes: 17 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new