Teco TK-1000/500

[DasBoot]

Is it possible to set the Hysteresis to more than 1 degree C on this unit? I have not purchased it yet and would like to confirm this before I make a big purchase. The manual is misleading and mentions a regulation range of 0,5 / 10 C. Can any owners of this chiller please confirm?

 

[DanyL]

I own the Teco Tk2000.
I’m not sure I understand what exactly are you asking about.

You set a target temperature as well as a higher temperature where it starts cooling. Each of these have a 0.5C increments.

 

[kingmushroom]

Yes you can.
The default setting is 1°C hysteresis.
If left as is and setting to heat and cool, target 26.5C, it will turn on heating at 25.5C or lower and turn off when temp reach 26.5C.
It will turn on cooling when water is at 27.5C or higher and turn off when cooled to 26.5C.

I don't tried other values and this setting is running in a tank so the folks inside the tank don't want me to tweak it. But I can be changed in the menu, I just don't want it to run too cold/hot.

Sorry for the late reply, but the answer might be helpful for someone else.