Nothing wrong with this system. My system is similar. RO/DI output to mechanical float valve in sump. 'Above Normal' water level sensor attached to Apex, alarms, and turns OFF output connected to electric ball valve. Ball valve closes when power is lost. I've added a 'high level' sensor as well, hard wired to an audible alarm, if the water level gets within an inch or so of the top of the sump, and a battery powered water alarm on the floor under the sump.
Works great, I sleep well at night.
On RO/DI system 'TDS Creep': Yes, RO membranes run more efficiently if you let them run for extended times. True, BUT... Water from that RO membrane is going through (in my case) a 3 stage DI system. No way that little bit of contaminate is getting into my tank. No. Way.
Add in the fact that my RO system is not used for tank alone... My RO system feeds a 5g pressure tank, attached to a drinking water faucet, fridge ice and water in the kitchen, and an ice maker on the patio. The RO unit runs a lot.
Also, you've got to do proper maintenance. I inspect my float valve, manually trip my 'above normal' sensor to insure it's working as expected, weekly. I replace my sediment filter, flush my RO membrane, and inspect my color change DI cartridges monthly, and change my (4) carbon block filters quarterly. RO membranes seem to last me about 2 years.