Timing a skimmer to come on and off

Kieran McBride

Community Member
View Badges
Joined
Sep 12, 2015
Messages
86
Reaction score
348
Rating - 0%
0   0   0
I'll admit it guys, the Apex is over my head in respect of programming.

I want my skimmer to come on and off at certain times of the day, (On at 10pm and off and 10am), I don't know where to start.

Is anyone able to do a step by step guide on how I achieve this?

TIA
 
Not sure what kind of skimmer you have but on mine I just have the pump that recirculates the water and produces the bubbles shut down on a simple wall timer with the pins. I got from HD. I shut my skimmer off from 11pm. to around 9 a.m.
I refuse to get involved with anything that needs me to weave through drop down boxes, scroll bars, passwords, usernames, windows behing wondows, junk cell phones, WIFI. etc.etc.
 
Not sure what kind of skimmer you have but on mine I just have the pump that recirculates the water and produces the bubbles shut down on a simple wall timer with the pins. I got from HD. I shut my skimmer off from 11pm. to around 9 a.m.
I refuse to get involved with anything that needs me to weave through drop down boxes, scroll bars, passwords, usernames, windows behing wondows, junk cell phones, WIFI. etc.etc.
It's just a simple on/off time procesdure for the Neptune Apex, I'm sure someone can point me in the right direction
 
If you want the Apex to turn your skimmer on and off at set times change the control type in 'Output Configuration' for that device location to light or something else that has time values, then just set the run times.
 
If you want the Apex to turn your skimmer on and off at set times change the control type in 'Output Configuration' for that device location to light or something else that has time values, then just set the run times.
Thanks but that is double dutch to me, I would need a step by step guide by someone
 
Tap the gear next to the outlet control you have the skimmer plugged into. change control type to one that has a timer ( lights, powerhead). Set your run times and you'll be all set.
Screenshot_20220722-135716_APEX Fusion.jpg
Screenshot_20220722-135754_APEX Fusion.jpg
Screenshot_20220722-140116_APEX Fusion.jpg
 
Tap the gear next to the outlet control you have the skimmer plugged into. change control type to one that has a timer ( lights, powerhead). Set your run times and you'll be all set.
Screenshot_20220722-135716_APEX Fusion.jpg
Screenshot_20220722-135754_APEX Fusion.jpg
Screenshot_20220722-140116_APEX Fusion.jpg
I've actually tried that but it didn't work lol
 
I appreciate your help, neither do I ;-)
Just as a double check and to make sure that you are working on the correct out or that the outlet is function properly, can you turn the skimmer off using the interface as shown below.

In addition, is that outlet set to "Auto", as if it is set to "On" then it will not follow the program.

IMG_7855.jpg
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new