Trident vs Alkatronic vs KH Director vs kh guardian

  • Thread starter Thread starter leepink23
  • Start date Start date
  • Tagged users Tagged users None
I’m using this BNC cable and it’s working fine:

TNP BNC Cable (15 Feet) - BNC Male To Male Extension Connector Adapter RF Professional RG-58/U Grade Coaxial Wire Cord Cable Jack Plug for Video Secur Amazon product ASIN B01FW1TE4Y

Cool, thanks. With this cable is Fusion reading the same figure(s) as the Alkatronic app?
 
Cool, thanks. With this cable is Fusion reading the same figure(s) as the Alkatronic app?

My last Alkatronic reading was 8.12 and the Apex is showing 8.09 right now... close enough for me :)
 
Don’t even use it anymore. Alerts from Alkatronic are perfect so I used the PM1 for something else.
 
My last Alkatronic reading was 8.12 and the Apex is showing 8.09 right now... close enough for me :)

I agree, that's close and for $10 I can't really go wrong. Has anyone found a cable that reports closer/more accurate readings?
 
Trident is installed, running first tests, installion was simple and straight forward.

0785D5D1-55DE-4750-BC70-6DA0DA0B0AA0.jpeg
 
Trident calibration was spot on. So far so good. The unit is super quiet and so far was what I was hoping for

DD58CF1A-BBFA-4001-B64C-C100A4AB4F14.jpeg 33D5A61A-5507-4608-A0DA-4EB83A86F890.png
 
I read that soon the reagent for Trident will be available on online vendors soon with the 6 month supply for $99.
 
The 6 month supply of reagents are out now for $99.
They have fixed the leaking reagent issues.
So far I am very happy with the Trident. It’s super quiet, minimal waste, controls my DOS, has been precise and accurate. I am very happy with my decision.
 
Dastaco is working on their own kh tester. They should release it pretty soon. Their tester will connect to the dastaco controller and regulate the co2...

AMS has lost their lead engineer and the project has stalled. They also state that when back on track they are looking to develop an interface to work with other alk monitors which is really good news. It has been suggested to me that in the meantime the best setup with a dastaco/alkatronic etc is to tune down the dastaco output to just below required levels and let the alk monitor dose small amounts of carbonate to fine tune back up to required levels. That way they dastaco never needs to be turned off. A spike failsafe I suspect would be fine if using an apex to control upper and lower limits.
 
Can someone summarize the thread please. Read a few pages but too much.. Overall what was the best monitor ?

Trident - Monitoring only 3 tests
Reef Bot Monitor / dosing multiple
Alkatronic - 1 test only (Alk or cal/mag)
KH Guardian - 1 test ALk
KH Director- Monitor / dosing 1 test ALK


KH director you can choose to monitor or monitor and dose. Anyone have any experience with KH Director?
 
You can monitor and or dose with the KH Director. I have 3 of them, I calibrate the PH probe every 6 months, all my tanks are steady at 7.5KH. One is controlled by a calcium reactor and is connected to a P4. I have a stand alone unit for my frag tank which is also monitor and dosing and has a second slave doser connected to it which is dosing aquaforest 3 part.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.8%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 24 36.4%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new