Tunze 6255 pump controller issue

[Jeromeit]

Hi there I have 2 6255s and just noticed that one of them is not responsive to the on board controller. It seems to be way stronger than the other one even at its lowest setting. Even when controlling it with my ghl profilux I have the same issue. Is there a way to trouble shoot this?

 

[Jeromeit]

Bump

 

[mfinn]

@rvitko

 

[rvitko Verified Sponsor]

I would try swapping the 7090's between pumps (built in controller). The manual shows how to remove them as it may be necessary to replace it due to water damage or to move the cable through a small opening. If the issue follows the controller let me know.

 

[Jeromeit]

Thanks will attempt this tonight. They've been in operation for one and a half month max and the controller has never touched water. I'm hoping it's the controller and not the pump itself. Thanks!

 

[rvitko Verified Sponsor]

It really could not be the pump itself but it could be a break in the wiring.

 

[Jeromeit]

@rvitko hi there I tried it out and it was still unresponsive. I even pressed the feed button, it did not respond.

 

[rvitko Verified Sponsor]

Does the originally not working controller work on the other pump? That is very strange. Can you forward me a copy of the receipt- Tunze at sbcglobal dot net

 

[Jeromeit]

Hi there yes the originally not working controller works on the other pump. Sending you the receipt today.

 

[rvitko Verified Sponsor]

OK, I will wait for the email and we can get you squared away.